- dovecot - dovecot.org

[Dovecot] Fatal: chdir(homedir) failed: Permission denied
by Καράμπης Παναγιώτης 13 Nov '04

13 Nov '04

hello all i run dovecot as my imap server on my university and squirrel as webmail. But squirrel returns an error: ERROR : Connection dropped by imap-server CAPABILITY i tail my /var/log/dovecot and this is the output with whatever user i try to log in and view mails: dovecot: Nov 13 17:51:27 Fatal: chdir(/home/epp719) failed with uid 2975: Permission denied dovecot: Nov 13 17:51:27 Error: child 17554 (imap) returned error 89 ---------------------------------------------------------------------- i give the: root@(host edited):/root# ls -lad /home/epp719 drwx---r-x 4 epp719 users 368 2004-11-13 17:49 /home/epp719 and directory exists i tried also changing permissions on dir but same things happen. both .qmail and Maildir exist in the home directory. I attach the dovecot.conf file... any help is appreciated! PS: Sorry about my english its not my native language.. oh i forgot squirrel gets data and attachments from mysql...

2 1

[Dovecot] make error
by Ken Woodward (IS) 12 Nov '04

12 Nov '04

Dear DINH and TIMO, Here are the last lines before the fatal error. It says that "set fnord ; amf=$2; \ " is the command that caused the error. Does this make any sense to you? "if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /r/downloads/dovecot-0.99.11/src *** Error code 1 The following command caused the error: set fnord ; amf=$2; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || case "$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /r/downloads/dovecot-0.99.11 *** Error code 1 make: Fatal error: Command failed for target `all-recursive-am' /r/downloads/dovecot-0.99.11>"\ ============================================================================ ============================= I can include my complete config.log which does complete with no indication of failure reported at the end, BUT, inside it does list fatal errors like: "configure:2802: gcc -o conftest -g -O2 conftest.c -lcposix >&5 ld: fatal: library -lcposix: not found ld: fatal: File processing errors. No output written to conftest" AND "Undefined first referenced symbol in file socket /var/tmp//ccsUoghx.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure:21217: $? = 1 configure: failed program was: | /* confdefs.h. */ " AND "Undefined first referenced symbol in file inet_addr /var/tmp//cceuY9Eo.o (symbol belongs to implicit dependency /usr/lib/libnsl.so.1) ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure:21383: $? = 1 configure: failed program was: | /* confdefs.h. */ " ============================================================================ ================================= Thanks for your help. P.S. Was I supposed to send a new message to dovecot at dovecot dot org like this or reply to your message?

1 0

[Dovecot] make error
by Ken Woodward (IS) 12 Nov '04

12 Nov '04

Can anyone help with this? I get the following error when running "make". "configure" worked fine. I am installing the latest dovecot on a Solaris OS10 machine make: Fatal error: Command failed for target `all-recursive' **** Error code 1 Also could someone tell me if it is possible to search all the archives through the complete message bodies or are we limited to searching each month individually and only on the message subject? Thanks for any help, Sincerely, Ken

3 2

[Dovecot] pem help
by Clinton Mills 12 Nov '04

12 Nov '04

When I run this: /usr/local/sbin/dovecot -c /etc/dovecot.conf I get this Fatal: Can't use SSL certificate /etc/ssl/certs/dovecot.pem: No such file or directory But in my conf file these are commented out?? #ssl_cert_file = /usr/share/ssl/certs/dovecot.pem #ssl_key_file = /usr/share/ssl/private/dovecot.pem Why would I get this error? Thanks Clinton Mills

2 1

[Dovecot] pop3d keeps downloading messages over and over again
by Gordon Thagard 12 Nov '04

12 Nov '04

Solaris 9 SunOS 5.9 Generic_117171-11 sun4u sparc SUNW,Ultra-250 gcc version 3.3.2 dovecot-0.99.11 compile options: LDFLAGS=-L/usr/local/ssl/lib CPPFLAGS=-I/usr/local/ssl/include/openssl ./configure --prefix=/opt/dovecot --disable-ipv6 --with-file-offset-size=32 --with-mem-align=4 --with-rawlog --with-ssl=openssl OK, this applies whether or not a user account is set to leave mail on the server or not. There are several things that might happen, depending on who knows what: 1. Mail pops fine. 2. The "DO NOT DELETE THIS EMAIL" keeps downloading over and over again. 3. All emails since the switch to this new test dovecot pop3d will be downloaded over and over again. Any help would be greatly appreciated. Thank you, Gordon Thagard

2 2

[Dovecot] duplicate woes
by Jeff Ramsey 12 Nov '04

12 Nov '04

Hi, I have FC2/Sendmail/Dovecot default setup. I turned on POP3 and POP3S in /etc/dovecot.conf. I started out getting duplicates only when I was using Outlook w/ 'Leave copy on server' option. Lately, I've been getting duplicates at seemingly random messages sent to and from seemingly random users. Any help will be appreciated. Thanks, Jeff Ramsey Tubafor Mill, Inc.

2 1

[Dovecot] Popping without home directories
by Andre Grove 12 Nov '04

12 Nov '04

Hello there I tend to e-mail user accounts to my servers with /sbin/nologin and /dev/null as their shell and home directories respectively. I have discovered that Dovcot does not like it when a user does not have a home directory. Obviosly the user POP3 and not IMAP! :P Is there a work around for this? I have a suspicion it is one of the chroot option, but I do not know the meaning chroot. Thanks Andre

2 1

[Dovecot] Possible Bug
by Chris L. Franklin 12 Nov '04

12 Nov '04

Okay in dovecot.conf I set the fallowing settings log_path = /var/log/dovecot info_log_path = /var/log/dovecot Then I setup log rotation for that file (using logrotate). But after it does the rotation. Dovecot dies. Now I know why this happens. But should it ? To over come this I now have it set to stop dovecot and start dovecot after it's done dealing with the log file. -- Chris L. Franklin --

2 1

[Dovecot] bug with LIST IMAP command
by DINH Viet Hoa 12 Nov '04

12 Nov '04

I am in mbox configuration, and I am getting INBOX listed 3 times. I suppose the first is /var/mail/login and the others are $HOME/Mail but they appear twice. However, it seems this is a bug. << $ telnet localhost 143 Trying 127.0.0.1... Connected to utopia.priv. Escape character is '^]'. * OK dovecot ready. 01 LOGIN login password 01 OK Logged in. 02 LIST "" "*" * LIST (\NoInferiors) "/" INBOX * LIST (\Noselect \HasChildren) "/" "queue" * LIST (\Noselect \HasChildren) "/" INBOX * LIST (\Noselect \HasChildren) "/" INBOX * LIST (\NoInferiors \UnMarked) "/" "INBOX/pingouin" * LIST (\Noselect \HasChildren) "/" "sent" * LIST (\NoInferiors) "/" "sent/1" 02 OK List completed. 02 LOGOUT * BYE Logging out 02 OK Logout completed. Connection closed by foreign host. >> -- DINH V. Hoa, "c'est stressant comme taf" -- coin

1 0

[Dovecot] [PATCH] NTLM update and crashfix
by Andrey Panin 10 Nov '04

10 Nov '04

Hello, attached patch allows LM authentication for older (Win9x) clients which do not pass NTLM response in type 3 message. It also fixes crash in dovecot-auth (empty credentials could be passed to hex_to_binary function if NTLM2 was negotiated). Please consider applying. Best regards. -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

1 0