Hello!

I'm trying for a lot of time to make managesieve working with dovecot 1.1.17 and virtual users on openSuSE 11.1. I think I'm doing some misconfiguration, but I can't figure it out. Perhaps it's something with the paths to the sieve scripts?

In dovecot.conf I find in the comments:

protocol managesieve {
#(...)
  # Specifies the location of the symlink pointing to the active script in
  # the sieve storage directory. This must match the SIEVE setting used by
  # deliver (refer to http://wiki.dovecot.org/LDA/Sieve#location for more
  # info). Variable substitution with % is recognized.
  # Take care: if a file in a maildir: begins with a '.', it is recognized
  # as a folder; so, avoid this.
  #sieve=~/.dovecot.sieve
  sieve = /drbd/mail/vmail/%d/%n/dovecot.sieve
}

"This must match the SIEVE setting used by deliver", so I have to take a look to LDA section, no? But there I don't find any hint for sieve settings:

protocol lda {
  # Address to use when sending rejection mails.
  postmaster_address = postmaster@mydomain.tld

  # Hostname to use in various parts of sent mails, eg. in Message-Id.
  # Default is the system's real hostname.
  #hostname = 

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  mail_plugins = cmusieve quota
  mail_plugin_dir = /usr/lib64/dovecot/modules/lda

  # If user is over quota, return with temporary failure instead of
  # bouncing the mail.
  #quota_full_tempfail = no

  # Format to use for logging mail deliveries. You can use variables:
  #  %$ - Delivery status message (e.g. "saved to INBOX")
  #  %m - Message-ID
  #  %s - Subject
  #  %f - From address
  #deliver_log_format = msgid=%m: %$

  # Binary to use for sending mails.
  sendmail_path = /usr/lib/sendmail

  # Human readable error message for rejection mails. Use can use variables:
  #  %n = CRLF, %r = reason, %s = subject, %t = recipient
  rejection_reason = Your message to <%t> was automatically rejected:%n%r

  # UNIX socket path to master authentication server to find users.
#  auth_socket_path = /drbd/mail/var/run/dovecot/auth-master
  auth_socket_path = /var/run/dovecot/auth-master

}

I tried to log in to managesieve manually with gnutls-cli, and that was successfull. I was able to authenticate. But when I try to put the example script from dovecot wiki (http://wiki.dovecot.org/ManageSieve/Troubleshooting)

PUTSCRIPT "hutsefluts" {6+}
keep;

I get no

OK "Putscript completed."

there happens nothing, managesieve seems to wait for something else.

When I look now into the directory where the script should be stored (the folder has been created automatically) I don't find any script file but a folder "tmp" that contains a plaintext file with the script commands inside, eg.

hutsefluts-12345678.M033562P2271.imap.sieve

After disconnecting, this file disappears.

In the dovecot.info log it looks like this:

dovecot: Jul 30 14:51:56 Info: auth(default): master out: USER  16      test@mydomain.tld home=/drbd/mail/vmail/mydomain.tld/test
   mail=maildir:/drbd/mail/vmail/mydomain.tld/test   uid=5001        gid=5001        quota_rule=*:storage=512000000B
dovecot: Jul 30 14:51:56 Info: managesieve-login: Login: user=<test@mydomain.tld>, method=PLAIN, rip=192.168.200.39, lip=192.168.200.40, TLS
dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test@mydomain.tld): Effective uid=5001, gid=5001, home=/drbd/mail/vmail/mydomain.tld/test
dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test@mydomain.tld): sieve-storage: using active sieve script path: /drbd/mail/vmail/mydomain.tld/test/dovecot.sieve
dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test@mydomain.tld): sieve-storage: using active sieve script path: /drbd/mail/vmail/mydomain.tld/test/dovecot.sieve
dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test@mydomain.tld): sieve-storage: using sieve script storage directory: /drbd/mail/vmail/mydomain.tld/test/sieve
dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test@mydomain.tld): sieve-storage: relative path to sieve storage in active link: sieve/

../vmail/mydomain.tld/test/dovecot.sieve is missing completely.

Perhaps you can give me a small hint?

And here is my "dovecot -n":

# 1.1.7: /etc/dovecot/dovecot.conf
Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 2256). Either grow the limit or change login_max_processes_count and max_mail_processes settings
# OS: Linux 2.6.27.25-0.1-default x86_64 openSUSE 11.1 (x86_64) ext3
base_dir: /drbd/mail/var/run/dovecot/
log_path: /var/log/dovecot.err
info_log_path: /var/log/dovecot.info
protocols: imaps managesieve
listen(default): *
listen(imap): *
listen(managesieve): 192.168.200.40:2000
ssl_listen(default): *:993
ssl_listen(imap): *:993
ssl_listen(managesieve): 
ssl_cert_file: /etc/ssl/certs/imap.crt
ssl_key_file: /etc/ssl/private/imap.key
verbose_ssl: yes
login_dir: /drbd/mail/var/run/dovecot//login
login_executable(default): /usr/lib/dovecot/imap-login
login_executable(imap): /usr/lib/dovecot/imap-login
login_executable(managesieve): /usr/lib/dovecot/managesieve-login
max_mail_processes: 2000
mail_max_userip_connections(default): 30
mail_max_userip_connections(imap): 30
mail_max_userip_connections(managesieve): 10
first_valid_uid: 5001
last_valid_uid: 5001
mail_location: maildir:/drbd/mail/vmail/%d/%n
mail_debug: yes
mail_executable(default): /usr/lib/dovecot/imap
mail_executable(imap): /usr/lib/dovecot/imap
mail_executable(managesieve): /usr/lib/dovecot/managesieve
mail_plugins(default): quota imap_quota
mail_plugins(imap): quota imap_quota
mail_plugins(managesieve): 
mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap
mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap
mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve
managesieve_implementation_string(default): dovecot
managesieve_implementation_string(imap): dovecot
managesieve_implementation_string(managesieve): Cyrus timsieved v2.2.13
sieve_storage(default): 
sieve_storage(imap): 
sieve_storage(managesieve): /drbd/mail/vmail/%d/%n/sieve
sieve(default): 
sieve(imap): 
sieve(managesieve): /drbd/mail/vmail/%d/%n/dovecot.sieve
auth default:
  mechanisms: plain login cram-md5
  user: nobody
  verbose: yes
  debug: yes
  debug_passwords: yes
  passdb:
    driver: sql
    args: /etc/dovecot/dovecot-sql.conf
  userdb:
    driver: passwd
  userdb:
    driver: sql
    args: /etc/dovecot/dovecot-sql.conf
  socket:
    type: listen
    client:
      path: /var/spool/postfix/private/auth
      mode: 432
      user: postfix
      group: postfix
    master:
      path: /var/run/dovecot/auth-master
      mode: 432
      user: vmail
      group: vmail
plugin:
  quota: maildir

By the way, I'm quite amazed how fast dovecot is developed at the moment, and it makes lots of fun to see it growing!!

kind regards,

Andreas

GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01