- dovecot - dovecot.org

[Dovecot] pgsql and default_pass_scheme
by eL gino 29 Sep '04

29 Sep '04

Hello list, I am running Dovecot 1.0-test46 on FreeBSD with PostgreSQL as backend, runs _very_ nice, but i can not set "default_pass_scheme = CRYPT" (only PLAIN) for PostgreSQL Auth in dovecot-pgsql.conf. I have a valid entry in pg_hba.conf (and reloaded/restarted): "local mail mail crypt" If i replace crypt in pg_hba.conf with md5 it works also with plain in dovecot-pgsql.conf? -- Christian. PS: sorry for my poore english.

2 2

Re: [Dovecot] Any way to disable imap on all but localhost ?
by Kim Culhan 29 Sep '04

29 Sep '04

--- michael(a)crosscode.org wrote: > It's still there, just chagned (and probably for the better - > less > confusing and I'd venture less code) in 1.0. > > I had: > > protocols = imap imaps > imap_listen = 127.0.0.1 > imaps_listen = * > > Now I have: > > protocols = imap imaps > protocol imap { > listen = 127.0.0.1 > ssl_listen = * > } > > However, after encountering the same problem you did I moved my > 0.99 > configuration file out of place and put the 1.0 > dovecot-example.conf file > into place and modified it, since that seemed like the easier thing > to do > (not that the imap section already exists in the new example > config., > it's just empty). Ok, just did the same, running dovecot-1.0-test46 dovecot is still listening on port 143 It appears dovecot imap listens on all the interfaces regardless This is running on FreeBSD 5.3-BETA4 -kim __________________________________ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail

1 0

Re: [Dovecot] Any way to disable imap on all but localhost ?
by michael＠crosscode.org 28 Sep '04

28 Sep '04

It's still there, just chagned (and probably for the better - less confusing and I'd venture less code) in 1.0. I had: protocols = imap imaps imap_listen = 127.0.0.1 imaps_listen = * Now I have: protocols = imap imaps protocol imap { listen = 127.0.0.1 ssl_listen = * } However, after encountering the same problem you did I moved my 0.99 configuration file out of place and put the 1.0 dovecot-example.conf file into place and modified it, since that seemed like the easier thing to do (not that the imap section already exists in the new example config., it's just empty). - Michael On Tue, 28 Sep 2004, Kim Culhan wrote: > > Noticed that some configuration settings like > imap_listen appear to have been removed. > > Any way to accomplish this ? > > -kim > > > > > __________________________________ > Do you Yahoo!? > New and Improved Yahoo! Mail - Send 10MB messages! > http://promotions.yahoo.com/new_mail >

1 0

[Dovecot] Any way to disable imap on all but localhost ?
by Kim Culhan 28 Sep '04

28 Sep '04

Noticed that some configuration settings like imap_listen appear to have been removed. Any way to accomplish this ? -kim __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

1 0

[Dovecot] Dovecot 1.0-test45 indexing issues
by dovecot＠spam.turbolink.net 28 Sep '04

28 Sep '04

We're currently on dovecot 0.99.10 with a few modifications (including one very nasty hack for the blank line at the beginning of the mailbox bug). We're using mbox all around. Everything works smoothly but we still ocasionally get corrupt mailboxes and indexes that need to be wiped out. I setup 1.0-test45 on one of our mailservers to start testing it and ran into a few issues. The first one is if I try to use mail_read_mmaped=yes I get this error: Error: POP3(sobo1): file istream-raw-mbox.c: line 410 (istream_raw_mbox_get_body_size): assertion failed: (rstream->mail_size != (uoff_t)-1) for every mailbox. If I switch to mail_read_mmaped=no everything works, but performance is extremely bad. I have a few test mailboxes with about 20k messages and if I toggle a message flag from unread to read, dovecot seems to re-read the entire mailbox up to that message (I saw this with strace). Is this how supposed to work?? I don't see behavior like this on 0.99.10, and on a mailbox with any substantial number of messages it really slows things down. Thanks for any input. - Mike

2 13

[Dovecot] Dovecot on Cygwin
by Andy Teijelo Pérez 28 Sep '04

28 Sep '04

Has anyone been able to run and use dovecot on Cygwin? Just to start asking, don't be affraid. Thanks in advance. Andy

1 0

RE: [Dovecot] Moving mail dirs
by Mark Lidstone 28 Sep '04

28 Sep '04

Ah! My ignorance is outshone only by your helpfulness. :) Many thanks, Mark Lidstone IT and Network Support Administrator BMT SeaTech Ltd Grove House, Meridians Cross, 7 Ocean Way Ocean Village, Southampton. SO14 3TJ. UK Tel: +44 (0)23 8063 5122 Fax: +44 (0)23 8063 5144 E-Mail: mailto:mark.lidstone@bmtseatech.co.uk Website: www.bmtseatech.co.uk ======================================================================== == Confidentiality Notice and Disclaimer: The contents of this e-mail and any attachments are intended only for the use of the e-mail addressee(s) shown. If you are not that person, or one of those persons, you are not allowed to take any action based upon it or to copy it, forward, distribute or disclose the contents of it and you should please delete it from your system. BMT SeaTech Limited does not accept liability for any errors or omissions in the context of this e-mail or its attachments which arise as a result of Internet transmission, nor accept liability for statements which are those of the author and not clearly made on behalf of BMT SeaTech Limited. ======================================================================== == -----Original Message----- From: Timo Sirainen [mailto:tss@iki.fi] Sent: 28 September 2004 16:14 To: Mark Lidstone Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Moving mail dirs On 28.9.2004, at 16:08, Mark Lidstone wrote: > Sep 28 14:03:36 <hostname> imap(<user1>): stat() failed with file > /home/<user1>/.Maildir/new: No such file or directory > Sep 28 14:03:36 <hostname> imap(<user2>): utime() failed with index > file > /home/<user2>/.Maildir/.INBOX/.imap.index: No such file or directory > > What have I missed? Or am I not supposed to move maildirs once > they're in use? Restarting Dovecot doesn't kill the existing processes which are still using the old directories and since they're gone they begin complaining. Correct way to do moving would be: kill dovecot killall imap move directories start dovecot

1 0

[Dovecot] Moving mail dirs
by Mark Lidstone 28 Sep '04

28 Sep '04

Hi all, This is probably a silly question, but I have a problem. I've had to move my users maildirs from: maildir:/home/%u/.Maildir To maildir:/data/mail/%u I've updated the MTA to put mail to the correct place and it's working fine. I've also changed the dovecot.conf file and restarted dovecot and I thought that would be all I needed to do. However, the users are getting lots of error messages, and looking in the relevant logs shows lots of entries like: Sep 28 14:03:36 <hostname> imap(<user1>): stat() failed with file /home/<user1>/.Maildir/new: No such file or directory Sep 28 14:03:36 <hostname> imap(<user2>): utime() failed with index file /home/<user2>/.Maildir/.INBOX/.imap.index: No such file or directory (Sorry for changing usernames and hostname, but I'm neurotic about that kind of thing) What have I missed? Or am I not supposed to move maildirs once they're in use? Any help greatly appreciated, Mark Lidstone IT and Network Support Administrator BMT SeaTech Ltd Grove House, Meridians Cross, 7 Ocean Way Ocean Village, Southampton. SO14 3TJ. UK Tel: +44 (0)23 8063 5122 Fax: +44 (0)23 8063 5144 E-Mail: mailto:mark.lidstone@bmtseatech.co.uk Website: www.bmtseatech.co.uk ======================================================================== == Confidentiality Notice and Disclaimer: The contents of this e-mail and any attachments are intended only for the use of the e-mail addressee(s) shown. If you are not that person, or one of those persons, you are not allowed to take any action based upon it or to copy it, forward, distribute or disclose the contents of it and you should please delete it from your system. BMT SeaTech Limited does not accept liability for any errors or omissions in the context of this e-mail or its attachments which arise as a result of Internet transmission, nor accept liability for statements which are those of the author and not clearly made on behalf of BMT SeaTech Limited. ======================================================================== == -----Original Message----- From: Timo Sirainen [mailto:tss@iki.fi] Sent: 28 September 2004 00:09 To: dovecot(a)spam.turbolink.net Cc: dovecot(a)procontrol.fi Subject: [Dovecot] Re: More test46 feedback On 28.9.2004, at 00:29, dovecot(a)spam.turbolink.net wrote: > Here's another error message I just started getting with test46: > > Error: POP3(test2): file mbox-lock.c: line 493 (mbox_lock): assertion > failed: (lock_type == F_RDLCK ||ibox->mbox_lock_type != F_RDLCK) Could you get gdb backtrace from this? I know this happens when you try to copy a message into the same mbox, but why would anyone do that? > I haven't seen the combined X-Status/X-UID nor the other log > corruption "Append with UID xxx, but next_uid = xxx" that I saw > earlier. That's good.

2 1

RE: [Dovecot] Moving mail dirs
by Mark Lidstone 28 Sep '04

28 Sep '04

Hi all, I have a temporary fix in case anyone is reading the archives with the same problem. Link the old location to the new location. E.g: mv /home/user/.Maildir /data/mail/user ln -s /data/mail/user /home/user/.Maildir Still no idea why dovecot is still looking in the original folders though. Thanks, Mark Lidstone IT and Network Support Administrator BMT SeaTech Ltd Grove House, Meridians Cross, 7 Ocean Way Ocean Village, Southampton. SO14 3TJ. UK Tel: +44 (0)23 8063 5122 Fax: +44 (0)23 8063 5144 E-Mail: mailto:mark.lidstone@bmtseatech.co.uk Website: www.bmtseatech.co.uk ======================================================================== == Confidentiality Notice and Disclaimer: The contents of this e-mail and any attachments are intended only for the use of the e-mail addressee(s) shown. If you are not that person, or one of those persons, you are not allowed to take any action based upon it or to copy it, forward, distribute or disclose the contents of it and you should please delete it from your system. BMT SeaTech Limited does not accept liability for any errors or omissions in the context of this e-mail or its attachments which arise as a result of Internet transmission, nor accept liability for statements which are those of the author and not clearly made on behalf of BMT SeaTech Limited. ======================================================================== == -----Original Message----- From: Mark Lidstone Sent: 28 September 2004 14:08 To: dovecot(a)dovecot.org Subject: [Dovecot] Moving mail dirs Hi all, This is probably a silly question, but I have a problem. I've had to move my users maildirs from: maildir:/home/%u/.Maildir To maildir:/data/mail/%u I've updated the MTA to put mail to the correct place and it's working fine. I've also changed the dovecot.conf file and restarted dovecot and I thought that would be all I needed to do. However, the users are getting lots of error messages, and looking in the relevant logs shows lots of entries like: Sep 28 14:03:36 <hostname> imap(<user1>): stat() failed with file /home/<user1>/.Maildir/new: No such file or directory Sep 28 14:03:36 <hostname> imap(<user2>): utime() failed with index file /home/<user2>/.Maildir/.INBOX/.imap.index: No such file or directory (Sorry for changing usernames and hostname, but I'm neurotic about that kind of thing) What have I missed? Or am I not supposed to move maildirs once they're in use? Any help greatly appreciated, Mark Lidstone IT and Network Support Administrator BMT SeaTech Ltd Grove House, Meridians Cross, 7 Ocean Way Ocean Village, Southampton. SO14 3TJ. UK Tel: +44 (0)23 8063 5122 Fax: +44 (0)23 8063 5144 E-Mail: mailto:mark.lidstone@bmtseatech.co.uk Website: www.bmtseatech.co.uk ======================================================================== == Confidentiality Notice and Disclaimer: The contents of this e-mail and any attachments are intended only for the use of the e-mail addressee(s) shown. If you are not that person, or one of those persons, you are not allowed to take any action based upon it or to copy it, forward, distribute or disclose the contents of it and you should please delete it from your system. BMT SeaTech Limited does not accept liability for any errors or omissions in the context of this e-mail or its attachments which arise as a result of Internet transmission, nor accept liability for statements which are those of the author and not clearly made on behalf of BMT SeaTech Limited. ======================================================================== == -----Original Message----- From: Timo Sirainen [mailto:tss@iki.fi] Sent: 28 September 2004 00:09 To: dovecot(a)spam.turbolink.net Cc: dovecot(a)procontrol.fi Subject: [Dovecot] Re: More test46 feedback On 28.9.2004, at 00:29, dovecot(a)spam.turbolink.net wrote: > Here's another error message I just started getting with test46: > > Error: POP3(test2): file mbox-lock.c: line 493 (mbox_lock): assertion > failed: (lock_type == F_RDLCK ||ibox->mbox_lock_type != F_RDLCK) Could you get gdb backtrace from this? I know this happens when you try to copy a message into the same mbox, but why would anyone do that? > I haven't seen the combined X-Status/X-UID nor the other log > corruption "Append with UID xxx, but next_uid = xxx" that I saw > earlier. That's good.

1 0

[Dovecot] Thunderbird 0.8 - Inbox grayed out and does not update
by Sitapati das 27 Sep '04

27 Sep '04

Hi all, I cannot get Thunderbird 0.8 to work with my dovecot IMAP server. It works fine with my work IMAP account - I'm not sure what they are using. What happens is that folders that I create in Thunderbird or Evolution can only contain subfolders or messages, not a combination of both. Folders which contain subfolders and not messages show up in Thunderbird grayed out. I can expand them and view the subfolders and the messages within those. The Inbox however, also shows up grayed out. When I look inside I can see the messages that were there when I created the IMAP account in Thunderbird, however, no new messages arrive, even after restarting Thunderbird. If I connect with Evolution 1.4 I can read the inbox without a problem. Has anyone seen this? warm regards, Joshua

4 5