- dovecot - dovecot.org

[Dovecot] Compile Error in current CVS
by Todd Burroughs 30 Mar '05

30 Mar '05

Had a small error with the current CVS version. It was in deliver.c. Here's a fix. I'm assuming that adding NULL is correct ;-) dovecot.2005-03-29/src # diff deliver/deliver.c.orig deliver/deliver.c 86c86 < box = mailbox_open(storage, mailbox, MAILBOX_OPEN_FAST | --- > box = mailbox_open(storage, mailbox, NULL, MAILBOX_OPEN_FAST | Here's the symptoms: deliver.c: In function `save_mail': deliver.c:87: warning: passing arg 3 of `mailbox_open' makes pointer from integer without a cast deliver.c:87: error: too few arguments to function `mailbox_open' make[3]: *** [deliver.o] Error 1 make[3]: Leaving directory `/services/src/9.2/dovecot/dovecot.2005-03-29/src/deliver' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/services/src/9.2/dovecot/dovecot.2005-03-29/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/services/src/9.2/dovecot/dovecot.2005-03-29' make: *** [all] Error 2

1 0

[Dovecot] Checkin 1.37 of src/lib-storage/mail-storage.c
by Geo Carncross 29 Mar '05

29 Mar '05

Checkin 1.37 of src/lib-storage/mail-storage.c added a parameter to mailbox_open() but this broke building src/deliver/deliver.c as revision 1.2 doesn't use the new parameter. It looks like save_mail() of src/deliver/deliver.c calls mailbox_open() and it looks like it might work fine if it were to use a (struct istream *)0 as the third parameter (instead of the flags) -- but I don't use deliver [yet], so I don't have any adequate way to test this. -- Internet Connection High Quality Web Hosting http://www.internetconnection.net/

1 0

[Dovecot] mbox zlib compression plugin
by Timo Sirainen 29 Mar '05

29 Mar '05

Some people have been asking this forever, but because it wasn't possible to implement it as a plugin, I hadn't done it. Now, due to some API changes for other purposes, it was suddenly easy. So, if you want to try it, grab the latest CVS code / nightly CVS snapshot and http://dovecot.org/patches/1.0/zlib-plugin.tar.gz Compilation instructions inside zlib-plugin.c file. What it does is check if mbox name ends with ".gz", if so it opens it as read-only using zlib. If the file isn't actually zlib compressed, zlib seems to be able to still access it as a normal file (but it's still read-only). It should be possible to implement it for maildir files as well by hooking into mail_get_stream().

1 0

[Dovecot] FC2 POP Configurtion
by Linux Stuff 29 Mar '05

29 Mar '05

I'm a newbie to dovecot and a little bit less of a newbit to linux. I am in the process of moving my server from RH9 to FC2. The only obstacle remaining is my email. I run sendmail with netscape mail clients - mostly PC's. They all can read their mail but none of the users can send. Depending on the state of the dovecot.conf file, I get the following: Mar 28 16:04:14 corvette sendmail[5810]: unable to open Berkeley db /etc/sasldb2: Invalid argument Mar 28 16:04:14 corvette sendmail[5810]: unable to open Berkeley db /etc/sasldb2: Invalid argument Mar 28 16:04:14 corvette sendmail[5810]: no secret in database I know I must be missing something, probably trivial. Does someone have a simple, easy-to-read, config file for dovecot pop running with sendmail? Thanks

1 0

[Dovecot] error creating storage
by Alex 28 Mar '05

28 Mar '05

Hello, I have some problems. I am getting the error: Mar 28 21:24:01 APOLLO imap(alex(a)mydomain.nl): Failed to create storage with data: mydomain.nl/alex What is wrong with it? I think it has something to do with the rights or something. Can anyone tell me what to do? Thank you, Alex

1 0

[Dovecot] Re: telnet to pop3 problem
by Obantec Support 28 Mar '05

28 Mar '05

Hi Yes i was :( did the change you suggested and that bit works now. Off to look at using syslog to how dovecot logging works. Mark ----- Original Message ----- From: "Herbert" <herbert(a)oslo.ath.cx> To: "Obantec Support" <support(a)obantec.net> Sent: Monday, March 28, 2005 4:31 PM Subject: Re: telnet to pop3 problem > Obantec Support <support(a)obantec.net> wrote: > > Hi > > > > default_mail_env was commented out. when i set it to > > > > default_mail_env = maildir:/var/spool/mail/%u > ^^^^^^^ > You are not using maildir, are you? > > > it fails to deliver maillog shows. > > Mar 28 15:34:31 proteus2a pop3(obantec): > > lstat(/var/spool/mail/obantec/cur) failed: Not a directory > > > > /var/spool/mail exists what is /cur ??? all i want is > > /var/spool/mail/obantec where obantec is the mail file. > > Maybe you should use: > > default_mail_env = mbox:/var/spool/mail/%u > > - Herbert > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.8.4 - Release Date: 27/03/2005 > >

1 0

[Dovecot] telnet to pop3 problem
by Obantec Support 28 Mar '05

28 Mar '05

Hi I have 1 customer who is having issues with pop3 on FC3 telnet mail.hisdomain.com 110 +OK dovecot ready. user beachy -ERR Unknown command. user beachy +OK pass letmein +OK Logged in. list -ERR No INBOX for user. pass & username fake for this example! Mark

2 2

[Dovecot] Wiki upgrade
by Timo Sirainen 28 Mar '05

28 Mar '05

Upgraded Moin wiki from 1.2.x -> 1.3.4 which required migrating old data using several scripts and reconfiguring the whole thing. If you see any problems, please mail me.

1 0

[Dovecot] Address with whitespace shows as ""@MISSING_DOMAIN
by Chris Wakelin 28 Mar '05

28 Mar '05

It seems that Dovecot gets confused when presented with a header like: From: someone(a)somewhere.org i.e. with leading whitespace and no "friendly name" This shows up as ""@MISSING_DOMAIN in clients, such as Pine, that believe what Dovecot tells them rather than parsing the headers themselves (e.g. Thunderbird). Here's a sample IMAP session: xyz FETCH 728 ENVELOPE * 728 FETCH (ENVELOPE ("Tue, 22 Mar 2005 10:10:50 +0100 (BST)" "Test" ((NIL NIL "" "MISSING_DOMAIN")) ((NIL NIL "c.d.wakelin" "reading.ac.uk")) ((NIL NIL "" "MISSING_DOMAIN")) ((NIL NIL "" "MISSING_DOMAIN")) NIL NIL NIL "<Pine.GSO.3.96.1010704101043.17798B-100000@suma3>")) xyz OK Fetch completed. Here's UW-IMAP on the same mailbox: . FETCH 729 ENVELOPE * 729 FETCH (ENVELOPE ("Tue, 22 Mar 2005 10:10:50 +0100 (BST)" "Test" ((NIL NIL "c.d.wakelin" "reading.ac.uk")) ((NIL NIL "c.d.wakelin" "reading.ac.uk")) ((NIL NIL "c.d.wakelin" "reading.ac.uk")) ((NIL NIL "c.d.wakelin" "reading.ac.uk")) NIL NIL NIL "<Pine.GSO.3.96.1010704101043.17798B-100000@suma3>")) . OK FETCH completed I'm not sure I read the RFC correctly, but it looks like whitespace is allowed (and if it wasn't, I'd expect our MTA, Exim to fix it on delivery). There's a particular member of one of the UK academic computing mailing lists who always seems to do this, but I'm not sure how common a problem it is! Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 2

[Dovecot] Troubleshooting help
by Paul Michael Reilly 28 Mar '05

28 Mar '05

Somehow, hopefully to be determined, I got my Thunderbird/dovecot Fedora Core 3 configuration into a real snit, such that I can no longer access my INBOX. When Thunderbird tries to get the INBOX content (or get new mail) it reports "The current command did not succeed. The mail server responded: Invalid messageset: -2147483648:*." Scouring logs and googling has come up empty. Now I'm flailing at trying to get to a state that this problem does not exist. I'd like to understand how this situation arose and how to deal with it better if it happens to any other users on my mail server. Thanks, -pmr

3 3