- dovecot - dovecot.org

[Dovecot] ssl_cipher_list
by Robert Allerstorfer 24 Jul '05

24 Jul '05

Hi, I have noticed the 'ssl_cipher_list' directive in the 1.0-test snapshots which is not in 0.99. It's default value seems to be "all:!low". However, this would not be compatible with openssl's cipher listing format. Thus, I would vote to change it's format to be openssl compatible. To be compatible, it has to be changed to "ALL:!LOW" (just upercased in this case). IMO, this would be helpful because executing openssl ciphers -v 'all:!low' would not return any cipher, but openssl ciphers -v 'ALL:!LOW' would return the expected cipher list such as ADH-AES256-SHA SSLv3 Kx=DH Au=None Enc=AES(256) Mac=SHA1 DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1 DHE-DSS-AES256-SHA SSLv3 Kx=DH Au=DSS Enc=AES(256) Mac=SHA1 AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 ADH-AES128-SHA SSLv3 Kx=DH Au=None Enc=AES(128) Mac=SHA1 DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-AES128-SHA SSLv3 Kx=DH Au=DSS Enc=AES(128) Mac=SHA1 AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-RC4-SHA SSLv3 Kx=DH Au=DSS Enc=RC4(128) Mac=SHA1 EXP1024-DHE-DSS-RC4-SHA SSLv3 Kx=DH(1024) Au=DSS Enc=RC4(56) Mac=SHA1 export EXP1024-RC4-SHA SSLv3 Kx=RSA(1024) Au=RSA Enc=RC4(56) Mac=SHA1 export EXP1024-DHE-DSS-DES-CBC-SHA SSLv3 Kx=DH(1024) Au=DSS Enc=DES(56) Mac=SHA1 export EXP1024-DES-CBC-SHA SSLv3 Kx=RSA(1024) Au=RSA Enc=DES(56) Mac=SHA1 export EXP1024-RC2-CBC-MD5 SSLv3 Kx=RSA(1024) Au=RSA Enc=RC2(56) Mac=MD5 export EXP1024-RC4-MD5 SSLv3 Kx=RSA(1024) Au=RSA Enc=RC4(56) Mac=MD5 export EXP-KRB5-RC4-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(40) Mac=MD5 export EXP-KRB5-RC2-CBC-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC2(40) Mac=MD5 export EXP-KRB5-DES-CBC-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=DES(40) Mac=MD5 export EXP-KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(40) Mac=SHA1 export EXP-KRB5-RC2-CBC-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC2(40) Mac=SHA1 export EXP-KRB5-DES-CBC-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=DES(40) Mac=SHA1 export KRB5-RC4-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=MD5 KRB5-DES-CBC3-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=MD5 KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=SHA1 KRB5-DES-CBC3-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=SHA1 EDH-RSA-DES-CBC3-SHA SSLv3 Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1 EXP-EDH-RSA-DES-CBC-SHA SSLv3 Kx=DH(512) Au=RSA Enc=DES(40) Mac=SHA1 export EDH-DSS-DES-CBC3-SHA SSLv3 Kx=DH Au=DSS Enc=3DES(168) Mac=SHA1 EXP-EDH-DSS-DES-CBC-SHA SSLv3 Kx=DH(512) Au=DSS Enc=DES(40) Mac=SHA1 export DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 EXP-DES-CBC-SHA SSLv3 Kx=RSA(512) Au=RSA Enc=DES(40) Mac=SHA1 export EXP-RC2-CBC-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 EXP-RC4-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export ADH-DES-CBC3-SHA SSLv3 Kx=DH Au=None Enc=3DES(168) Mac=SHA1 EXP-ADH-DES-CBC-SHA SSLv3 Kx=DH(512) Au=None Enc=DES(40) Mac=SHA1 export ADH-RC4-MD5 SSLv3 Kx=DH Au=None Enc=RC4(128) Mac=MD5 EXP-ADH-RC4-MD5 SSLv3 Kx=DH(512) Au=None Enc=RC4(40) Mac=MD5 export DES-CBC3-MD5 SSLv2 Kx=RSA Au=RSA Enc=3DES(168) Mac=MD5 RC2-CBC-MD5 SSLv2 Kx=RSA Au=RSA Enc=RC2(128) Mac=MD5 EXP-RC2-CBC-MD5 SSLv2 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export RC4-MD5 SSLv2 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 EXP-RC4-MD5 SSLv2 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export I want dovecot to only accept high encrypted ciphers, thus it should support ssl_cipher_list = ALL:!ADH!LOW:!SSLv2:!EXP:+HIGH:+MEDIUM corresponding to a openssl list such as DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1 DHE-DSS-AES256-SHA SSLv3 Kx=DH Au=DSS Enc=AES(256) Mac=SHA1 AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 KRB5-DES-CBC3-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=MD5 KRB5-DES-CBC3-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=SHA1 EDH-RSA-DES-CBC3-SHA SSLv3 Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1 EDH-DSS-DES-CBC3-SHA SSLv3 Kx=DH Au=DSS Enc=3DES(168) Mac=SHA1 DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-AES128-SHA SSLv3 Kx=DH Au=DSS Enc=AES(128) Mac=SHA1 AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-RC4-SHA SSLv3 Kx=DH Au=DSS Enc=RC4(128) Mac=SHA1 KRB5-RC4-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=MD5 KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=SHA1 RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 This would really make "Dovecot (...) written with security primarily in mind" Thanks for consideration! rob.

2 2

[Dovecot] feature or bug on delete?
by Cor Bosman 23 Jul '05

23 Jul '05

RFC 3501 mentions this: The DELETE command MUST NOT remove inferior hierarchical names. For example, if a mailbox "foo" has an inferior "foo.bar" (assuming "." is the hierarchy delimiter character), removing "foo" MUST NOT remove "foo.bar". It is an error to attempt to delete a name that has inferior hierarchical names and also has the \Noselect mailbox name attribute (see the description of the LIST response for more details). It is permitted to delete a name that has inferior hierarchical names and does not have the \Noselect mailbox name attribute. In this case, all messages in that mailbox are removed, and the name will acquire the \Noselect mailbox name attribute. This is what dovecot does: . create foo . OK Create completed. . create foo/bar . OK Create completed. . list "" "*" * LIST (\HasChildren) "/" "foo" * LIST (\HasNoChildren) "/" "foo/bar" . OK List completed. (some other output removed here) . delete foo . OK Delete completed. . list "" "*" * LIST (\HasNoChildren) "/" "foo/bar" . OK List completed. Reading the above section, shouldnt I be seeing a: * LIST (\Noselect \HasChildren) "/" "foo" Regards, Cor

2 2

[Dovecot] Assertion failure in mail-index-transaction.c
by Todd Burroughs 23 Jul '05

23 Jul '05

I just noticed one instance of this in the current CVS version: dovecot: Jul 18 15:25:48 Error: 5962 IMAP(mailuser): mbox sync: Expunged message reappeared in mailbox /mailhome/new/o/h/mailuser/mbox (UID 2834 < 2872) dovecot: Jul 18 15:25:48 Error: 5962 IMAP(mailuser): file mail-index-transaction.c: line 129 (mail_index_buffer_convert_to_uids): assertion failed: (*seq != 0) dovecot: Jul 18 15:25:48 Error: child 5962 (imap) killed with signal 6 (gdb) bt full #0 0xffffe410 in ?? () No symbol table info available. #1 0xbffff438 in ?? () No symbol table info available. #2 0x00000006 in ?? () No symbol table info available. #3 0x0000174a in ?? () No symbol table info available. #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 No symbol table info available. #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 No symbol table info available. #6 0x0809a96a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x174a <Address 0x174a out of bounds>) at failures.c:374 No locals. #7 0x0809ad84 in i_panic ( format=0x80a772c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 No locals. #8 0x08082711 in mail_index_buffer_convert_to_uids (t=0x80d14b8, array=0x80d14d0, range=1) at mail-index-transaction.c:129 view = (struct mail_index_view *) 0x80cfdc0 rec = Variable "rec" is not available. (gdb) bt #0 0xffffe410 in ?? () #1 0xbffff438 in ?? () #2 0x00000006 in ?? () #3 0x0000174a in ?? () #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 #6 0x0809a96a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x174a <Address 0x174a out of bounds>) at failures.c:374 #7 0x0809ad84 in i_panic ( format=0x80a772c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 #8 0x08082711 in mail_index_buffer_convert_to_uids (t=0x80d14b8, array=0x80d14d0, range=1) at mail-index-transaction.c:129 #9 0x08083b87 in mail_index_transaction_commit (t=0x80d14b8, log_file_seq_r=0xbffff65c, log_file_offset_r=0xbffff660) at mail-index-transaction.c:183 #10 0x080703f4 in mbox_sync (mbox=0x80c5bc0, flags=Variable "flags" is not available. ) at mbox-sync.c:1623 #11 0x080710c9 in mbox_storage_sync_init (box=0x80c5bc0, flags=MAILBOX_SYNC_FLAG_FULL_READ) at mbox-sync.c:1700 #12 0x0808ef01 in mailbox_sync_init (box=0x0, flags=MAILBOX_SYNC_FLAG_FULL_READ) at mail-storage.c:334 #13 0x0805eb58 in imap_sync_nonselected (box=0x80c5bc0, flags=MAILBOX_SYNC_FLAG_FULL_READ) at imap-sync.c:166 #14 0x080580f6 in _cmd_select_full (cmd=0x80beba8, readonly=0) at cmd-select.c:39 #15 0x08058281 in cmd_select (cmd=0x80beba8) at cmd-select.c:92 #16 0x0805986b in _client_input (context=0x80beb68) at client.c:334 #17 0x0809ff3a in io_loop_handler_run (ioloop=0x80bd9b0) at ioloop-poll.c:184 #18 0x0809f569 in io_loop_run (ioloop=0x80bd9b0) at ioloop.c:218 #19 0x08060657 in main (argc=1, argv=0xbffffa34, envp=0xbffffa3c) at main.c:228 (gdb) p seq $1 = (uint32_t *) 0x80d4d18 (gdb) p *seq $2 = 0 (gdb) p view->map $3 = (struct mail_index_map *) 0x80c5fd0 (gdb) p *view->map $4 = {refcount = 3, hdr = {major_version = 7 '\a', minor_version = 0 '\0', base_header_size = 120, header_size = 200, record_size = 36, compat_data = "\001\b\004", indexid = 1113829460, flags = 0, uid_validity = 1113827022, next_uid = 2872, messages_count = 929, recent_messages_count = 0, seen_messages_count = 810, deleted_messages_count = 0, first_recent_uid_lowwater = 0, first_unseen_uid_lowwater = 1149, first_deleted_uid_lowwater = 2846, log_file_seq = 8, log_file_int_offset = 27912, log_file_ext_offset = 27912, sync_size = 9241460, sync_stamp = 1113863658, day_stamp = 1121659200, day_first_uid = {2855, 2849, 2849, 2753, 2753, 2753, 2491, 187}}, hdr_base = 0x80c60b0, records = 0x80c61d8, records_count = 929, extension_pool = 0x80ce490, extensions = { buffer = 0x80ce4c0, element_size = 28}, ext_id_map = {buffer = 0x80ce588, element_size = 4}, mmap_base = 0x0, mmap_size = 0, mmap_used_size = 0, buffer = 0x80c61b8, hdr_copy_buf = 0x80c6090, keyword_idx_map = { buffer = 0x0, element_size = 0}, write_to_disk = 0} (gdb) p t $5 = (struct mail_index_transaction *) 0x80d14b8 (gdb) p *t $6 = {refcount = 1, view = 0x80cfdc0, appends = {buffer = 0x80d4830, element_size = 8}, first_new_seq = 930, last_new_seq = 953, expunges = { buffer = 0x80d4810, element_size = 8}, updates = {buffer = 0x0, element_size = 0}, last_update_idx = 0, pre_hdr_change = '\0' <repeats 119 times>, pre_hdr_mask = '\0' <repeats 119 times>, post_hdr_change = '\0' <repeats 28 times>, "O\v", '\0' <repeats 89 times>, post_hdr_mask = '\0' <repeats 28 times>, "\001\001\001\001", '\0' <repeats 87 times>, ext_rec_updates = {buffer = 0x80d4750, element_size = 8}, ext_resizes = {buffer = 0x0, element_size = 0}, ext_resets = {buffer = 0x0, element_size = 0}, keyword_updates = {buffer = 0x0, element_size = 0}, keyword_resets = {buffer = 0x80d4730, element_size = 8}, cache_trans_ctx = 0x0, hide_transaction = 0, no_appends = 0, external = 1, pre_hdr_changed = 0, post_hdr_changed = 1, log_updates = 1} (gdb) p j $7 = 2 (gdb) p range $8 = 1

2 1

[Dovecot] pop3 authentication failure - password mismatch
by James Sun 23 Jul '05

23 Jul '05

I tried to run dovecot 1.0 built by myself but encountered the above problem. See the error traces below. First of all, the password and user are correct, as it worked with the 0.99 rpm version of dovecot. I also hand verified with ssh. I also attached the dovecot config file below. Any ideas? Jun fetchmail output on client: ------------------------------------- fetchmail: POP3< +OK Dovecot ready. fetchmail: POP3> CAPA fetchmail: POP3< +OK fetchmail: POP3< CAPA fetchmail: POP3< TOP fetchmail: POP3< USER fetchmail: POP3< UIDL fetchmail: POP3< RESP-CODES fetchmail: POP3< PIPELINING fetchmail: POP3< SASL PLAIN fetchmail: POP3< . fetchmail: POP3> USER jam fetchmail: POP3< +OK fetchmail: POP3> PASS * fetchmail: POP3< -ERR Authentication failed. fetchmail: Authentication failed. maillog on dovecot server: -------------------------------------- Jul 22 18:28:18 hsiufen dovecot: auth(default): passwd(jam,24.6.106.170): password mismatch Jul 22 18:28:19 hsiufen dovecot: pop3-login: Aborted login [24.6.106.170] Jul 22 18:29:32 hsiufen dovecot: Killed with signal 2 dovecot.conf ------------------ protocols = imap imaps pop3 pop3s listen = * ssl_disable = no disable_plaintext_auth = no protocol imap { login_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/imap-login mail_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/imap } protocol pop3 { login_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/pop3-login mail_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/pop3 } auth_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/dovecot-auth auth_verbose = yes auth default { mechanisms = plain passdb = passwd userdb = passwd user = root }

2 3

[Dovecot] Stable Version
by Marc Perkel 23 Jul '05

23 Jul '05

I'm very new to Dovecot - still testing it - and planing to convert in the futire. I see a lot of rapid development here which I like. But I'm wondering if there is any kind of schedule for blessing 1.0 as official - or - what the custom is for a stable release. Just trying to think about when to jump in. I'm fairly brave, but the feature I need we just added today. -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

2 1

[Dovecot] 1.0-test78
by Timo Sirainen 22 Jul '05

22 Jul '05

http://dovecot.org/test/ Fixes: - Crashes in non-x86 64bit systems - Bugs in cache file header caching (you probably should delete all dovecot.index.cache files to be sure the bug won't haunt you in future) - FETCH ENVELOPE patch by Chris Wakelin (I'll try to figure out what to do with the list patch later) Known bugs left: - Thunderbird + maildir: moving lots of messages from mailbox to another may cause deadlock (lock timeouts in half a minute or so and fails the operation). - I guess I should try to look at the Thunderbird + POP3 + lots of messages -> DELE error too again.. - I've heard that 1.0-tests are a lot slower than 0.99.x or 1.0-stable when checking new mail (with kmail), ie. client asking STATUS of all mailboxes. I've looked at their strace outputs and the difference (5-10x slower) comes from 1.0-test waiting longer in poll() for client input, which doesn't really make any sense to me. Can anyone verify this or think of reasons why this could happen? Maybe I'm setting some socket option differently, although I don't think I've changed anything..

8 15

[Dovecot] 1.0-stable and nfs
by Cyril Feraudet 22 Jul '05

22 Jul '05

Hi all, I've a little pb with 1.0-stable on nfs share without lockd : with : - lock_method = dotlock - mmap_disable = yes I've : - dovecot: Jul 22 11:58:33 Error: IMAP(xxxxxxxx): open() failed with index file (null): Bad address with : - lock_method = dotlock - mmap_disable = no I've : - dovecot: Jul 22 11:59:47 Error: IMAP(xxxxxxxx): lock_method=dotlock and mmap_disable=no combination isn't supported. You don't _really_ want it anyway. Someone have an idea ? Thanks, Cyril Feraudet

2 3

[Dovecot] dovecot starts and exit immediately? - help needed
by James Sun 22 Jul '05

22 Jul '05

Since nobody answered my previous question on dovecot marking new mails as old mails, I decided to build a version of dovecot of my own to debug. I downloaded and compiled dovecot 1.0 (stable). After setting up the conf file, I ran dovecot but it exited immediate with status 0. As a result, remote client cannot connect and retrieve mails. There is no man page, and I only found two command line options, -F and -c. None of these options seem to matter. Any suggestions? I must have done something simple and wrong here. Jun

2 4

[Dovecot] Bug in 0.99.14 mbox handling - mail UIDs are renumbered without bumping UIDVALIDITY
by David McBride 22 Jul '05

22 Jul '05

Package: dovecot-imapd Version: 0.99.14-1 Severity: important Hi, I think I've identified a bug in Dovecot 0.99.14 as packaged and distributed by Debian Sarge. I believe the bug lies in the original Dovecot source, not with any modifications made by Debian. Specifically, this bug deals with Dovecot's handling of message unique identifiers (UIDs) for IMAP clients when using the mbox mailbox storage format. Some background for those not familiar with the details; (I had to look a lot of this stuff up; see also http://www.ietf.org/rfc/rfc2060.txt) --- 8< -------------------------------------------------------------- All IMAP servers are required to maintain unique identifiers for each email in an IMAP mailbox that are persistent between sessions. Dovecot stores the unique identifiers for each email in an mbox in an X-UID header. Clients which maintain a local cache of already-retrieved emails use an email's UID as a key; thus, if the UID of a particular email were to change on a server then the client's cached state would be invalid. To cope with the case that the UIDs need to be invalidated, whether because the original store has been lost or for some other reason, there is also the UIDVALIDITY number. This 32bit integer must be increased to some higher value to indicate that any previously cached email ids are now invalid. In Dovecot-managed mbox files, this number is stored in the X-IMAPbase header in the first message of that mbox and is typically the uid-invalidation time expressed in unix timestamp format (ie the number of seconds elapsed since the epoch.) --- 8< -------------------------------------------------------------- Okay, the actual bug: Dovecot routinely (and apparently unneccessarily) renumbers all of the UIDs in our mbox-backed mailboxes without updating the UIDVALIDITY count. This results in caching mail clients (such as Evolution and Thunderbird) presenting the incorrect email to the user when browsing their mail. Configuration: We are using Dovecot as a standalone daemon (ie without using inetd.) We have configured the default mail environment with the following string: default_mail_env = mbox:%h/Mail/:INBOX=%h/.email:INDEX=MEMORY ie each end-user's primary INBOX is an mbox, ~/.email, and other IMAP folders are also stored as mboxes in the directory ~/Mail/. Indexes are maintained in memory but are not stored on disk. I don't think any of the rest of the configuration is relavant, but I'm happy to detail anything else about the setup if needed. Reproducing the bug: I'm afraid I don't have a proper protocol dump demonstrating this bug, so I'm just going to describe all of the end-user steps to recreate the problem: 1) Connect to the Dovecot IMAP service with a caching mail client, such as Evolution or Thunderbird. Download a local copy of the IMAP server contents of a test mbox-backed mailbox to the local cache. For example, I have a test mbox with old root mail. Messages are numbered from 1 to 163. The most recent message has an X-UID: field of 163. 2) Delete one of the messages in the middle of the mailbox. For example, mark the second-oldest message in the mailbox, which has a UID of 2, for deletion. Expunge the mailbox. 3) The UIDs of the other messages at this point have not been altered. Disconnect from the IMAP server. (With Evolution, I actually had to restart the program to reproduce this bug.) 4) Reconnect to the IMAP service, and allow the client to re-sync. You will find that the X-UID of all of the messages after the one that was deleted have been decremented -- and, if you're using a caching client, all of the message *bodies* will appear to have been shifted down by one. Reading the headers in the mbox file directly, Dovecot has renumbered all of the UIDs from 1 to N but not altered the UIDVALIDITY field: dwm@kalimdor $ grep X-UID: Root X-UID: 1 X-UID: 2 [... all numbers between 2 and 161 follow ...] X-UID: 161 X-UID: 162 dwm@kalimdor $ grep X-IMAPbase: Root X-IMAPbase: 1063356421 162 1063356421 == Sept 2003, when the mailbox was first created. This is a bug. Either Dovecot should not renumber the UIDs of each message, or (if it really is necessary), it should increase the UIDVALIDITY field to some higher number to invalidate the caches stored by any remote clients. This bug wasn't observed when using previous versions of Dovecot (we were previously using 0.99.10.6 before this upgrade without noticing anything broken.) I'm hoping someone familiar with the source tree can identify and suggest a fix relatively quickly; failing that, I'll take a look around to see if I can work out where the problem is and implement a fix it myself. Cheers, David -- David McBride <dwm(a)tastycake.net>

1 0

[Dovecot] Changes made to imap descriptor handling in test78?
by Dominic Marks 22 Jul '05

22 Jul '05

Hello, What has changed from test77 to test78 in the way imap manages its descriptors? I upgraded to test78 this morning on a small site which I use as a testbed for testing various things. Running the same copy of my kqueue patch with test77 works quite well [*], with test78 imap has some problems. Here is some debugging output I recorded: Jul 14 12:55:27 egg dovecot: imap-login: Login: user=<dom>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, SSL Jul 14 12:55:30 egg dovecot: IMAP(dom): kqueue was given an unknown descriptor 1, -1: No such file or directory The second line points refers to io_loop_handler_remove, the tcp/ip socket (1) is having the read filter (-1) removed, suspending events from the socket, or at least, that is what should be happening. From kevent(2) for ENOENT: [ENOENT] The event could not be found to be modified or deleted. This suggests to me that we are incorrectly calling io_loop_handler_remove before we should. This error happens immediately after a client opens their mailbox. I have checked pop3 and it does not share the problem. I'm going to have a look at the CVS mail archive to see if I can work out what has changed. [*] Occasionally I was receiving ENOENT in test77 also in io_loop_handler_remove, but only occasionally, perhaps a few times a day for each client. This also didn't occur when opening the mailbox, but some time later. I'm still looking for the trigger for that. Cheers, -- Dominic Marks

2 1