- dovecot - dovecot.org

[Dovecot] configuring lda
by Lenny 09 Feb '06

09 Feb '06

after coping lda stanza into the config file, I get "unknown protocol name" error. adding lda to the list of protocols doesn't seem to do the trick. lda was built during compile and the binary is present, piping into it manually spits error messages about missing config, so how do I go about the problem above ? It is my undertanding that using dovecot-lda would help maintain the indexes in proper state ( as opposed to using procmail and having to rebuild indexes from scratch upon delivery of large amounts of mail ) ? mucho gracias to you all. protocol lda { # If you wish to use plugins you need to specify plugin directory # For example quota enforcing is implemented by plugin #module_dir = /usr/local/lib/dovecot/lda # Address from LDA should send MDNs like out of quota postmaster_address = postmaster(a)your.dom # If there is no user-specific Sieve-script, global Sieve script is # executed if set. #global_script_path = # UNIX socket path to master authentication server to find users. auth_socket_path = /var/run/dovecot-auth-master }

2 5

[Dovecot] Broken NSS Implementation
by Campbell McKilligan 08 Feb '06

08 Feb '06

We're getting this error when IMAP clients attempt to authenticate using their aliases rather than their actual username: Feb ... dovecot: auth(default): BROKEN NSS IMPLEMENTATION: getpwnam() lookup returned different user than was requested (campbellmckilligan != campbell.mckilligan). Feb ... dovecot: imap-login: Internal login failure: user=<campbell.mckilligan>, method=plain, rip=82.148.120.110, lip=172.20.2.2, TLS Feb ... dovecot: child 27345 (auth) returned error 89 For historic reasons, there is no consistency with which username in individuals mail client. NSS correctly returns the name that dovecot should use for the purposes of accessing mailboxes etc. Dovecot-0.99.14 worked fine in this regard - but since upgrading to 1.0beta3 we have this problem. It's running on a Fedora Core 4 server. It compiled fine with selinux enabled. Is there a switch to control the response to this NSS behaviour? Any help appreciated. Campbell

2 2

RE: [Dovecot] How to have a "public" readonly folder?
by Villalovos, John L 08 Feb '06

08 Feb '06

dovecot-bounces(a)dovecot.org <> wrote: > I have my email users who are using dovecot-1.0.beta2. I just upgraded to dovecot-1.0.beta3. No change. > I also have setup a dummy account to get the Linux Kernel Mailing > List (LKML) traffic. > > I would like to have it so that my IMAP users (maybe POP3 but > don't need > that) be able to read the LKML mailing list from that email account. > > I can put the email into an mbox or a maildir for the LKML mail. > > I have played around with the namespace and public option and I can't > get it to work :( > > I tried this: > > namespace public { > separator = / > prefix = Public/ > location = maildir:/home/virtemail/lkml/ > } > > In my email client (Mozilla Thunderbird 1.5), I am unable to view the > Public folder. If I select subscribe, I can see the Public folder > but it is grayed out. If I do a symbolic link it works, in the sense that I can know subscribe to the folder. I created the file 'dovecot-shared' in the shared folder (I also updated the Wiki to make the procedure a little bit clearer). I couldn't seem to figure out a good way to make it read only though. So I still can't seem to get the namespace method working. I also tried pointing the location at an mbox and that did not work. In the client I can see the Public folder listed but it is grayed out and won't let me subscribe. Any thoughts? Thanks, John

1 0

Re: [Dovecot] Mail.app message numbering for deleted messages
by Jesse Chan-Norris 08 Feb '06

08 Feb '06

On Mon, 23 Jan 2006, Jesse Chan-Norris wrote: > On Jan 22, 2006, at 6:44 AM, Timo Sirainen wrote: > > On Mon, 2006-01-16 at 18:29 -0500, jcn-dovecot(a)pith.org > wrote: > I'm having a strange problem that appeared when I > upgraded from� > > .99something to 1.0alpha3 and then disappeared for a while and then� > > re-appeared when I upgraded to 1.0alpha5. > > > I am using mbox and IMAP in Apple's Mail.app to read my mail. When I� > > delete a message in Mail.app, the message gets marked as deleted in the� > > spool and it disappears from the mail listing in Mail. However, the� > > message number does not change until I either manually flush the > > deleted� messages through mail, or I go offline which deletes the > > messages from the� spool. > > > I have mbox_lazy_writes set to 'no' but this didn't seem to have any� > > effect on the behavior. I never saw this type of behavior with UW-IMAP� > > either, which is what I migrated from. > > > What do you mean by "message number doesn't change"? > > To me this sounds like it all works as it should. Deleted messages are > really deleted only until expunge command is given, which is done when > you manually select "purge expunged messages" command or whatever it was > called in Mail. > > Maybe before with UW-IMAP you just had some "automatically expunge > messages" option set? I don't think that UW-IMAP was expunging messages because I could open up the mbox with pine and see all of the messages flagged as "Deleted" but not yet expunged. And when I try a similar test with Fastmail.fm (delete the message in Mail, then check using the web interface) the mail is marked as deleted in the web interface and does not show up in Mail.app but the messages are re-numbered appropriately. Granted, I have no idea how Mail.app does its numbering (especially since Thunderbird doesn't have message numbering), but is it possible that there's more information that the IMAP server should be sending back that Dovecot isn't? I've attached a screenshot from my Mail.app that shows the numbering issue. The gaps in the message sequence are where a deleted (but not expunged) message was. jcn

4 3

[Dovecot] Mac mail copy/delete problems w/1.0b2
by Tony Kay 08 Feb '06

08 Feb '06

Hi, Mac mail (a horribly mis-behaved client, it seems), has a horribly hard time deleting/copying large blocks of messages from one folder to another. The basic symptom is: 1. Select a bunch of messages 2. Click on delete 3. Wait for a _very_ long time. It also seems very slow on copying, so it may be the "trash folder copy on delete" that is really slowing it down. Anybody else seen this? -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 The best way to have a good idea is to have a lot of ideas. Dr. Linus Pauling

4 6

[Dovecot] Dovecot does not access /var/mail when using Maildir
by mirko＠mirkonet.nl 08 Feb '06

08 Feb '06

Hello, I'm running debain on my machine with postfix, squirrelmail and dovecot installed. Everything works fine and I'm able to access my mail via squirrelmail and via Outlook with imap. However I want to create subfolders what is not possible. After reading I discovered that I use mbox and that maildir is needed in order to be able to use subfolders. I have created a Maildir folder with the maildirmake.dovecot command in my /home/mirko directory and corrected the owner. Now dovecot uses the Maildir and I can create subfolers. However my problem is that I don't receive Emails in my Inbox. Incoming mails are delivered to /var/mail/mirko, but when dovecot uses Maildir it doesn't access this. I have played with the default_mail_env settings in dovecot.conf which does influence the use of mbox or Maildir. However the problem remains: As soon as Maildir is used, the Inbox is empty and I don't receive Email. Is there a way when Maildir is used to point dovecot to /var/mail/ for the incoming Email? Or do I something else wrong? Your help is appreciated. Greetings, Mirko

3 3

[Dovecot] Out of memory problem
by Neil Wilson 08 Feb '06

08 Feb '06

Hi guys, Running SuSe 9.3 with dovecot 1.0.alpha3 source installation. One of the users has quite a lot of important email in a folder, but when he trys to view this folder, it either sits and waits, and then times out, or just logs out straight away. Looking in the log(/var/log/mail), I'm getting the following error. Feb 6 09:22:08 mail postfix/qmgr[27221]: 198B96D1CE: removed Feb 6 09:22:08 mail dovecot: imap(ralphs): pool_system_malloc(): Out of memory Feb 6 09:22:08 mail dovecot: child 23018 (imap) returned error 83 (Out of memory) I've searched around on google for this error and haven't found anything useful as of yet. My next step is to upgrade to the latest version of dovecot, but this is quite a large company, and I will need to wait until after hours to do the upgrade. Any help would be greatly appreciated. Thanks! Neil Wilson DcData Powered by Linux, driven by passion! -- This email and all contents are subject to the following disclaimer: http://www.dcdata.co.za/emaildisclaimer.html

3 11

[Dovecot] Latest snapshot: ./configure does not finish normally
by Alexander Shikoff 08 Feb '06

08 Feb '06

Hi, OS: FreeBSD 6.0-RELEASE-p2 latest dovecot snapshot does not configurable. ./configure script fails: # ./configure --prefix=/usr/local/dovecot --with-passwd --with-passwd-file --without-shadow --with-pam --without-bsdauth --without-ldap --without-vpopmail --with-static-userdb --without-pgsql --with-mysql --with-pop3d --disable-ipv6 --with-storages [... skip ...] config.status: creating src/pop3/Makefile config.status: creating src/pop3-login/Makefile config.status: creating src/util/Makefile config.status: creating src/plugins/Makefile config.status: error: cannot find input file: src/plugins/convert/Makefile.in Snapshot dated 20060201 is configurable, but `make' fails: # ./configure --prefix=/usr/local/dovecot --with-passwd --with-passwd-file --without-shadow --with-pam --without-bsdauth --without-ldap --without-vpopmail --with-static-userdb --without-pgsql --with-mysql --with-pop3d --disable-ipv6 --with-storages [... skip ...] # make gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -o imap cmd-append.o cmd-authenticate.o cmd-capability.o cmd-check.o cmd-close.o cmd-copy.o cmd-create.o cmd-delete.o cmd-examine.o cmd-expunge.o cmd-fetch.o cmd-idle.o cmd-list.o cmd-login.o cmd-logout.o cmd-lsub.o cmd-namespace.o cmd-noop.o cmd-rename.o cmd-search.o cmd-select.o cmd-sort.o cmd-status.o cmd-store.o cmd-subscribe.o cmd-thread.o cmd-uid.o cmd-unselect.o cmd-unsubscribe.o client.o commands.o commands-util.o imap-expunge.o imap-fetch.o imap-fetch-body.o imap-messageset.o imap-search.o imap-sort.o imap-sync.o imap-thread.o mail-storage-callbacks.o main.o namespace.o -Wl,--export-dynamic ../lib-storage/register/libstorage-register.a ../lib-storage/index/libstorage_index.a ../lib-index/libindex.a ../lib-storage/libstorage.a ../lib-storage/subscription-file/libstorage_subscription_file.a ../lib-imap/libimap.a ../lib-mail/libmail.a ../lib-dict/libdict.a ../lib-charset/libcharset.a ../lib/liblib.a ../lib-storage/register/libstorage-register.a(mail-storage-register.o)(.text+0x7): In function `mail_storage_register_all': /usr/home/minotaur/Soft/dovecot-1.0.beta2/src/lib-storage/register/mail-storage-register.c:6: undefined reference to `yes_storage' *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2/src/imap. *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2/src. *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2. *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2. -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua Mob.: +380 67 946 31 49

2 1

[Dovecot] beta3
by Pavel Volkovitskiy 08 Feb '06

08 Feb '06

Does any schedule exist for beta3? I'm now running stable snapshot from cvs, but i don't think it's a good thing, beta2 has memory leak in mysql code So what should i do? apply patch to beta2 or beta3 will be really soon? -- Pavel

1 0

[Dovecot] How to have a "public" readonly folder?
by Villalovos, John L 08 Feb '06

08 Feb '06

I searched the website and the mailing list and had difficulty finding an answer. I have my email users who are using dovecot-1.0.beta2. I also have setup a dummy account to get the Linux Kernel Mailing List (LKML) traffic. I would like to have it so that my IMAP users (maybe POP3 but don't need that) be able to read the LKML mailing list from that email account. I can put the email into an mbox or a maildir for the LKML mail. I have played around with the namespace and public option and I can't get it to work :( I tried this: namespace public { separator = / prefix = Public/ location = maildir:/home/virtemail/lkml/ } In my email client (Mozilla Thunderbird 1.5), I am unable to view the Public folder. If I select subscribe, I can see the Public folder but it is grayed out. Any ideas? Thanks, John

1 0