February 2014 - dovecot

[Dovecot] dsync in a cronjob to replace offlineimap
by Guilhem Moulin 24 Mar '14

24 Mar '14

Hi list, Replacing offlineimap with dsync for IMAP-to-IMAP synchronization (using dovecot 2.1.7) is working great, but now that I upgraded to 2.2.9 I'd like to take advantage of the incremental replication [1]. I don't think having a separate replicator process & notifications suits my configuration, as I want to sync my server with my laptop which is not always on or might be behind a firewall. After reading ‘replication/replicator/dsync-client.c’ I was thinking of writing a small wrapper around dsync performing a daily full replication and updating the state otherwise. The following works great in a cronjob doveadm sync -l30 imap.example.org but when I try to get the current state doveadm sync -l30 -fs '' imap.example.org >~/mail/dsync.state and later use incremental replication state=$(< ~/mail/dsync.state) doveadm sync -l30 -s "$state" imap.example.org >~/mail/dsync.state the state seems to somehow quickly become "stale" and messages stop being retrieved from the server. I understand that dsync's incremental replication is mostly intended to be used by the replicator process, but I'm wondering whether it's also possible to use it manually ;-) If so, how to keep a sane state? Thanks, cheers, -- Guilhem. [1] http://wiki2.dovecot.org/Replication

2 1

[Dovecot] When does the replication run normally?
by Daniel Thielemann 18 Mar '14

18 Mar '14

Hi, I got my manual dsync finally working and can replicate mails by initiate it from comandline (doveadm sync -u mail(a)domain.dom -d), but it does not run by itself (per dovecot replication). When does dovecot invoke the replication normally? Thanks in advance Daniel

2 2

[Dovecot] dsync Error: Mailbox INBOX: Save commit failed: Mailbox was deleted under us
by Alan McGinlay - SICS 17 Mar '14

17 Mar '14

Hi, I am doing a mass migration of users from Cyrus imap on a solaris server to dovecot 1:2.2.9-1ubuntu1 and am getting this weird issue with dsync if I try to do a "full" sync. Debug output below: dsync(user(a)example.com): Error: Mailbox INBOX: Save commit failed: Mailbox was deleted under us dsync(user(a)example.com): Debug: brain M: out box 'INBOX' recv_state=recv_last_common send_state=done changed=1 dsync(user(a)example.com): Debug: brain M: out state=sync_mails changed=1 dsync(user(a)example.com): Debug: brain S: in state=sync_mails dsync(user(a)example.com): Debug: brain S: in box 'INBOX' recv_state=recv_last_common send_state=done dsync(user(a)example.com): Debug: brain S: out box 'INBOX' recv_state=recv_last_common send_state=done changed=0 dsync(user(a)example.com): Debug: brain S: out state=sync_mails changed=0 dsync(user(a)example.com): Debug: imapc(10.10.10.10:143): Disconnected [2]+ Killed /usr/bin/dsync -v -o mail_fsync=never backup -R -f -u user(a)example.com imapc: (I changed the domain / ip here of course) I notice that it does the IMAP sync for a while and then shows connecting info for pop3 (I have configuration for both imap and pop). The user in question has never connected with POP. imap migration config: imapc_host = 10.10.10.10 imapc_user = %u imapc_master_user = cyrusadmin imapc_password = blahblahblahpasswordhere imapc_features = rfc822.size imapc_features = $imapc_features #fetch-headers mail_prefetch_count = 20 pop configuration: pop3c_host = pop.example.com pop3c_user = %u pop3c_master_user = cyrusadmin pop3c_password = blahblahblahpasswordhere namespace { prefix = POP3-MIGRATION-NS/ location = pop3c: list = no hidden = yes } protocol doveadm { mail_plugins = $mail_plugins pop3_migration } plugin { pop3_migration_mailbox = POP3-MIGRATION-NS/INBOX } Thanks in advance for any pointers on this! /Alan

2 1

[Dovecot] panic with 2.2.10 and GETMETADATA
by Michael Cramer 16 Mar '14

16 Mar '14

i have in my configs the following lines: 10-mail.conf:mail_attribute_dict = file:/srv/vmail/dovecot/metadata/%d/%n/attributes 20-imap.conf:imap_metadata = yes when i test GETMETADATA with telnet i got a pannic in my error.log file and no attributes file in the given location is created root@i920:/etc/dovecot/conf.d# telnet localhost imap Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready. 01 LOGIN tester(a)domain.com ********* 01 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIA L CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE SEARCH=FUZZY NOTIFY METADATA COMPRESS=DEFLATE QUOTA ACL RIGHTS=texk] Logged in 02 GETMETADATA "*" (/shared/test) Connection closed by foreign host. in error.log i have these lines: Dec 23 17:20:00 imap(tester(a)domain.com): Panic: file imap-client.c: line 634 (client_command_free): assertion failed: (client->output_cmd_lock == NULL) Dec 23 17:20:00 imap(tester(a)domain.com): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x5e900) [0x7fb053bea900] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e9de) [0x7fb053bea9de] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fb053ba5bfe] -> dovecot/imap() [0x415c17] -> dovecot/imap() [0x415d8a] -> dovecot/imap() [0x415e15] -> dovecot/imap(client_handle_input+0x115) [0x416115] -> dovecot/imap(client_input+0x72) [0x4164a2] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x27) [0x7fb053bfa8f7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xd7) [0x7fb053bfb687] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7fb053bfa498] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fb053baadf3] -> dovecot/imap(main+0x2af) [0x40b06f] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7fb0537e5de5] -> dovecot/imap() [0x40b1cc] gdb with bt full gives: #0 0x00007f174b6bdf77 in raise () from /lib/x86_64-linux-gnu/libc.so.6 No symbol table info available. #1 0x00007f174b6c15e8 in abort () from /lib/x86_64-linux-gnu/libc.so.6 No symbol table info available. #2 0x00007f174baad8f6 in default_fatal_finish (type=<optimized out>, status=status@entry=0) at failures.c:193 backtrace = 0x1801040 "/usr/lib/dovecot/libdovecot.so.0(+0x5e900) [0x7f174baad900] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e9de) [0x7f174baad9de] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f174ba68bfe] -> dovecot/im"... #3 0x00007f174baad9de in i_internal_fatal_handler (ctx=0x7fffe2002eb0, format=<optimized out>, args=<optimized out>) at failures.c:657 status = 0 #4 0x00007f174ba68bfe in i_panic (format=format@entry=0x423040 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:267 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0} args = {{gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7fffe2002fa0, reg_save_area = 0x7fffe2002ee0}} #5 0x0000000000415c17 in client_command_free (_cmd=_cmd@entry=0x7fffe2002fc8) at imap-client.c:634 cmd = 0x183a2d0 client = 0x18396f0 state = CLIENT_COMMAND_STATE_WAIT_INPUT __FUNCTION__ = "client_command_free" #6 0x0000000000415d8a in client_command_input (cmd=0x0) at imap-client.c:783 client = 0x18396f0 command = <optimized out> __FUNCTION__ = "client_command_input" #7 0x0000000000415e15 in client_command_input (cmd=0x183a2d0) at imap-client.c:841 client = 0x18396f0 command = <optimized out> __FUNCTION__ = "client_command_input" #8 0x0000000000416115 in client_handle_next_command (remove_io_r=<synthetischer Zeiger>, client=0x18396f0) at imap-client.c:879 No locals. #9 client_handle_input (client=client@entry=0x18396f0) at imap-client.c:891 _data_stack_cur_id = 3 remove_io = false handled_commands = false __FUNCTION__ = "client_handle_input" #10 0x00000000004164a2 in client_input (client=0x18396f0) at imap-client.c:933 cmd = 0x181db70 output = 0x183a120 bytes = 35 __FUNCTION__ = "client_input" #11 0x00007f174babd8f7 in io_loop_call_io (io=0x183a1f0) at ioloop.c:388 ioloop = 0x1808730 t_id = 2 #12 0x00007f174babe687 in io_loop_handler_run (ioloop=ioloop@entry=0x1808730) at ioloop-epoll.c:220 ctx = 0x18093c0 list = 0x180adf0 io = <optimized out> tv = {tv_sec = 1799, tv_usec = 999100} events_count = <optimized out> msecs = <optimized out> ret = 1 i = 0 call = <optimized out> __FUNCTION__ = "io_loop_handler_run" #13 0x00007f174babd498 in io_loop_run (ioloop=0x1808730) at ioloop.c:412 __FUNCTION__ = "io_loop_run" #14 0x00007f174ba6ddf3 in master_service_run (service=0x18085c0, callback=callback@entry=0x41eea0 <client_connected>) at master-service.c:566 No locals. #15 0x000000000040b06f in main (argc=1, argv=0x1808390) at main.c:400 set_roots = {0x426d00 <imap_setting_parser_info>, 0x0} login_set = {auth_socket_path = 0x1800048 "\001", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0x41f250 <login_client_connected>, failure_callback = 0x41ef80 <login_client_failed>, request_auth_token = 1} service_flags = <optimized out> storage_service_flags = <optimized out> username = 0x0 c = <optimized out>

2 2

[Dovecot] Disable/patch iOS7 Full Body Search
by Chris Laif 12 Mar '14

12 Mar '14

As mentioned in other posts [1], iOS7 Mail App uses a multi-folder full body search by default. As to my knowledge, this behavior cannot be disabled within the Mail App. Is there any way to disable/patch this behavior on the server side? My users complain that searching now takes 'forever'. They were happy with the old behavior (searching From/To/Subject only). I do NOT want to setup/maintain a dovecot FTS. I just want to have the 'old' behavior. Chris [1 ]http://blog.fastmail.fm/2013/09/17/ios-7-mail-app-uses-multi-folder-body-searches-by-default/ ("Our plan at FastMail is to detect iOS clients, and convert all searches into FUZZY searches.")

4 5

[Dovecot] Mbox corruption - Inbox beginning with 'FFrom' or 'FrFrom'
by Dimos Alevizos 08 Mar '14

08 Mar '14

Hello, we're having some problems with our dovecot setup. I've seen similar problems in the mailing list some years ago but alas wasn't able to find a solution. Our setup is as follows : An MX farm (postfix) sends mails via LMTP to a director farm (dovecot 2.1.12) which proxies pop3/imap/lmtp traffic to a dovecot farm (dovecot 2.1.16). All mailboxes and indexes are on NFS and all servers are Centos. The problem is that at times we see mailboxes (all of them are in mbox format) beginning with FFrom or FrFrom and of course dovecot says it's not a valid mbox file. If we manually remove the offending extra characters from the beginning of the file everything is working again, but often the same user will show the problem again tomorrow. However it's very rare and so far we haven't been able to reproduce the problem. After activating the mail_log plugin hoping it'll help us locate the problem we run across this case : The user (let's call him user(a)domain.gr) logs in via pop3 and deletes some mails but one of them fails: Jun 19 11:09:18 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.40, mpid=1389, secured, session=<Ao+rWH3fHgBT660a> Jun 19 11:09:18 director5 dovecot: pop3-login: proxy(user(a)domain.gr): started proxying to 83.235.66.40:110: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.65, session=<Ao+rWH3fHgBT660a> Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20670, msgid=<9f5b1a20a9428ed31a9e7e42ce4411f08d0.20130612070424(a)mail84.us2.rsgsv.net>, size=36526 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20671, msgid=<b27d72dc5a47a3235a232494c6fe8aa0(a)newsletter.stockout.gr>, size=4637 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20672, msgid=<1113670779560.1111910791405.1470.2.32032003(a)scheduler.constantcontact.com>, size=38655 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20673, msgid=<83600a274c1407c5aa4c263e2592cb54(a)debop.gr>, size=1181688 Jun 19 11:09:24 pop01 dovecot: pop3(user(a)domain.gr): expunge: box=INBOX, uid=20674, msgid=<F2A59BE7-007A-4567-9BA5-803446C3D7F8(a)bernier-eliades.gr>, size=61116 Jun 19 11:09:26 pop01 dovecot: pop3(user(a)domain.gr): Error: Next message unexpectedly corrupted in mbox file /var/mail/K/Y/V/domain_gr_user_007 at 1 Jun 19 11:09:26 pop01 dovecot: pop3(user(a)domain.gr): Error: Cached message offset 1 is invalid for mbox file /var/mail/K/Y/V/domain_gr_user_007 Jun 19 11:09:27 pop01 dovecot: pop3(user(a)domain.gr): Disconnected: Logged out top=0/0, retr=2/1502843, del=122/359, size=137448432 Jun 19 11:09:27 pop01 dovecot: pop3(user(a)domain.gr): Warning: Our dotlock file /var/mail/K/Y/V/domain_gr_user_007.lock was deleted (locked 9 secs ago, touched 9 secs ago) Jun 19 11:09:27 pop01 dovecot: pop3(user(a)domain.gr): Error: file_dotlock_delete() failed with mbox file /var/mail/K/Y/V/domain_gr_user_007: No such file or directory Jun 19 11:09:27 director5 dovecot: pop3-login: proxy(user(a)domain.gr): disconnecting 83.235.173.26 (Disconnected by server): user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.65, session=<Ao+rWH3fHgBT660a> However he's still able to log in again : Jun 19 11:11:36 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=85.74.231.10, lip=83.235.66.40, mpid=10094, secured, session=<QDLrYH3f7ABVSucK> Jun 19 11:11:36 director3 dovecot: pop3-login: proxy(user(a)domain.gr): started proxying to 83.235.66.40:110: user=<user(a)domain.gr>, method=PLAIN, rip=85.74.231.10, lip=83.235.66.63, session=<QDLrYH3f7ABVSucK> Jun 19 11:11:51 pop01 dovecot: pop3(user(a)domain.gr): Disconnected: Logged out top=0/0, retr=0/0, del=0/237, size=75036938 Jun 19 11:11:51 director3 dovecot: pop3-login: proxy(user(a)domain.gr): disconnecting 85.74.231.10 (Disconnected by server): user=<user(a)domain.gr>, method=PLAIN, rip=85.74.231.10, lip=83.235.66.63, session=<QDLrYH3f7ABVSucK> A few minutes later he receives another mail which is delivered with no problem : Jun 19 11:30:39 corvus amavis[546]: (00546-22) Passed CLEAN, [91.190.168.40] [91.190.168.40] <tk-14439(a)free.splio.com> -> <user(a)domain.gr>, Message-ID: <58175-bWFyaW5hQGJlcm5pZXItZWxpYWR lcy5ncg==(a)free.splio.com>, mail_id: J1P-0WpmQksJ, Hits: 1.412, size: 9025, queued_as: 02BA4AE00414, Tests: [DKIM_VALID=-0.1,DKIM_VERIFIED=-0.1,FREEMAIL_FROM=0.001,HTML_IMAGE_RATIO_04=0.61,INVALID_MSGID=1,URIBL_BLOCKED=0.001], autolearn=disabled, 1533 ms Jun 19 11:30:39 corvus smtp/smtpd[1283]: proxy-accept: END-OF-MESSAGE: 250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 02BA4AE00414; from=<tk-14439(a)free.splio.com> to=<marina(a)bernier-eliades.gr> proto=ESMTP helo=<poc-pbcs2.splio.com> Jun 19 11:30:39 pop01 dovecot: lmtp(4099, user(a)domain.gr) 77O4IHlGwVEDEAAAYg/qxw: msgid=58175-bWFyaW5hQGJlcm5pZXItZWxpYWRlcy5ncg==(a)free.splio.com: from=residence.suddenly(a)gmx.com size=9610 saved mail to INBOX Jun 19 11:30:39 corvus postfix/lmtp[1350]: 02BA4AE00414: to=<user(a)domain.gr>, relay=lmtp.otenet.gr[62.103.147.209]:24, delay=0.12, delays=0.01/0/0/0.11, dsn=2.0.0, status=sent (250 2.0.0 <user(a)domain.gr> 77O4IHlGwVEDEAAAYg/qxw Saved) And then RIGHT after the successful delivery, the mbox somehow ends up corrupted with an FFrom in the beginning : Jun 19 11:31:27 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.40, mpid=14630, secured, session=<eBLjp33fUwBT660a> Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Syncing INBOX failed: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Couldn't init INBOX: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 Jun 19 11:31:27 director5 dovecot: pop3-login: proxy(user(a)domain.gr): Login failed to 83.235.66.40:110: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3-login: Login: user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.40, mpid=14642, secured, session=<eBLjp33fUwBT660a> Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Syncing INBOX failed: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Error: Couldn't init INBOX: Mailbox isn't a valid mbox file Jun 19 11:31:27 pop01 dovecot: pop3(user(a)domain.gr): Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 Jun 19 11:31:27 director5 dovecot: pop3-login: proxy(user(a)domain.gr): Login failed to 83.235.66.40:110: Mailbox isn't a valid mbox file Jun 19 11:31:27 director5 dovecot: pop3-login: Aborted login (proxy dest auth failed): user=<user(a)domain.gr>, method=PLAIN, rip=83.235.173.26, lip=83.235.66.65, session=<eBLjp33fUwBT660a Our config : # 2.1.16: /opt/dovecot-2.1.16/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-92.1.22.el5 x86_64 CentOS release 5.9 (Final) auth_cache_negative_ttl = 10 mins auth_cache_size = 5 M auth_cache_ttl = 10 mins auth_verbose = yes default_client_limit = 5000 default_process_limit = 500 deliver_log_format = msgid=%m: from=%f size=%p %$ dict { sqlquota = mysql:/opt/dovecot/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 20 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = ready login_trusted_networks = 83.235.66.0/24 mail_access_groups = mail disk root mail_fsync = always mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify mbox_lock_timeout = 3 secs mbox_read_locks = dotlock fcntl mmap_disable = yes passdb { args = /opt/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid size quota = dict:User quota::noenforcing:proxy::sqlquota sieve = ~/.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags } postmaster_address = postmaster(a)otenet.gr quota_full_tempfail = yes service auth-worker { user = dovenull } service dict { unix_listener dict { group = mail mode = 0666 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { client_limit = 1 inet_listener lmtp { port = 24 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /opt/dovecot/etc/dovecot/quota-warning.sh user = dovecot } ssl = no userdb { args = /opt/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = quota sieve quota } protocol lda { mail_plugins = quota sieve quota } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_max_userip_connections = 100 mail_plugins = quota imap_quota quota notify mail_log } protocol pop3 { mail_max_userip_connections = 100 mail_plugins = quota quota mail_log notify pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_lock_session = yes pop3_reuse_xuidl = yes pop3_uidl_format = %08Xu%08Xv } Thank you for your time. Dimos Alevizos

4 10

[Dovecot] Dovecot Migration: Retrieving/Logging POP/IMAP Passwords in Plaintext
by Traiano Welcome 05 Mar '14

05 Mar '14

Hi List I'm currently in the process of migrating my dovecot imap/pop users to a new server and have to extract their passwords in order to import them into the new system (different password encryption schemes). I've tried enabling auth_* debug parameters in my dovecot.conf in the hope that this would result in logging plaintext passwords to the dovecot log. However dovecot does not log the passwords in plaintext under any debugging configuration. My question: Is there any other configuration of dovecot that would allow me to capture POP/IMAP passwords at a successful login time? Dovecot version: 1.0.7 (from dovecot-1.0.7-7.el5_7.1 rpm) The output of dovecot -n is: --- # 1.0.7: /etc/dovecot.conf info_log_path: /var/log/dovecot.debug verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: mbox:~:INBOX=~/Mailbox mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 --- My dovecot.conf is as follows: ------ info_log_path = /var/log/dovecot.debug verbose_ssl = yes mail_location = mbox:~:INBOX=~/Mailbox mail_debug = yes protocol imap { } protocol pop3 { } protocol lda { postmaster_address = postmaster(a)example.com } auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain login passdb pam { } userdb passwd { } user = root socket listen { client { path = /var/run/dovecot/auth-client mode = 0666 } } } dict { } plugin { } --- Many thanks in advance! Traiano

3 5

[Dovecot] Error "Initializing mail storage ..." after upgrading to 2.2.10
by Götz Reinicke - IT Koordinator 04 Mar '14

04 Mar '14

Hi, I did the upgrade frpom 1.2.x to 2.2.10 and had some warnings/errors on a very few accounts/mailboxes. All of them where permission related and solved. Dovecot rocks again. But on one mailbox I do get an error: Error: user rechnnugseingang-animationsinstitut: Initialization failed: Initializing mail storage from mail_location setting failed Error: Invalid user settings. Refer to server log for more information. There is a homedirectory and the permissions are set like on all other accounts. The username is quite long (35 characters) but an other one with 34 is working fine. And before the upgrade there was no error. Thnaks for any help or hint. Regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

5 11

[Dovecot] Windows 8 issues (using Live/Outlook)
by Eriberto 04 Mar '14

04 Mar '14

Hi! I am trying to make Windows 8 using Live 2012 and Outlook 2010 login in Dovecot POP3s. However, I receive this message in log: Feb 28 07:32:05 ipanema dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=10.0.0.10, lip=10.0.0.1, TLS handshaking: Disconnected, session=<joP78nTz9ACsFQAF> Note that user is sent as blank and this is the only log line. I used debug mode too: Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE key exchanges Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE key exchanges Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x10, ret=1: before/accept initialization [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2001, ret=1: before/accept initialization [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client hello A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server hello A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write certificate A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server done A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 flush data [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: pop3-login: Warning: SSL failed: where=0x2002: SSLv3 read client certificate A [10.0.0.10] Feb 28 09:07:07 ipanema dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Feb 28 09:07:07 ipanema dovecot: auth: Debug: Read auth token secret from /var/run/dovecot/auth-token-secret.dat Feb 28 09:07:07 ipanema dovecot: auth: Debug: auth client connected (pid=8138) Feb 28 09:07:07 ipanema dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=10.0.0.10, lip=10.0.0.1, TLS handshaking: Disconnected, session=<QDraRnbzMwCsFQAF> Analysing the traffic with tshark, I can see: 0.007163 10.0.0.10 -> 10.0.0.1 TLSv1.2 331 Certificate, Server Hello Done I am using Dovecot 2.2.9 and I think it is TLS compatible. External (non-MS) clients, as Mozilla Thunderbird and Sylpheed, are working fine. Can someone point me a light? # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.4 ext4 Thanks in advanced. Regards, Eriberto

2 1

[Dovecot] maildir quota divergence
by Juan Carlos Sanchez 03 Mar '14

03 Mar '14

Hello; We are using maildir quotas and have found differences in many users in respect to what system command are showing and doveadm quotas. For example, four user test, we have: doveadm quota get -u test Quota name Type Value Limit % STORAGE 98066 102400 95 MESSAGE 883 - 0 But if we check user mail_location with "du" system command we get he is using 70458 Kb. We are running dovecot 2.1.17 ¿any clue? Thanks in advance.

3 5