January 2012 - dovecot

[Dovecot] LMTP : Can't handle mixed proxy/non-proxy destinations
by Alexis Lelion 01 Feb '12

01 Feb '12

Hello, In my current setup, I uses two mailservers to handle the users connections, and my emails are stored on a distant server using NFS (maildir architecture) Dovecot is both my IMAP server and the delivery agent (LMTP via postfix) To avoid indexing issues related to NFS, proxying is enabled both on IMAP and LMTP. But when a mail is sent to users that are shared between the servers, I got the subject mentionned error in the logs : Jan 25 09:05:12 mail01 postfix/lmtp[23934]: A92709300DB: to=< user_on_mail02(a)domain.com>, relay=mail01.domain.com[private/dovecot-lmtp], delay=0.07, delays=0.01/0/0/0.06, dsn=4.3.0, status=deferred (host mail01.domain.com[private/dovecot-lmtp] said: 451 4.3.0 < user_on_mail02(a)domain.com> Can't handle mixed proxy/non-proxy destinations (in reply to RCPT TO command)) >From what I saw, the mail is then put in the queue, and wait until the next time Postifx will browse the queue. The mail will then be correctly delivered on "mail02". However, the "queue_run_delay" postfix parameter is set to 900, which means that the mail will be delivered with a lag of 15 minutes. I was wondering if there was another way of handling this, for example by triggering an immediate queue lookup from postfix or forwarding a copy of the mail to the other server. Note that the postfix "queue_run_delay" was increased to 15min on purpose, so I cannot change that. I'm using dovecot 2.0.15 on Debian Squeeze, kernel 2.6.32-5-amd64. Thanks, Alexis

2 3

[Dovecot] Issues w/ Apple devices after migration to dovecot
by Armistead, Kurt 01 Feb '12

01 Feb '12

Hi guys. Recently we've moved our old (and I mean _really_ old) mailserver to a new hardware. Since I had quite some time on my hands, I decided to switch from courier to dovecot. Transition went pretty smoothly and the users experienced just a few hours' blackout. Only trouble now is that, after re-configuring some IOS handsets and tablets, not all messages are displayed correctly. For example, I had a long existing mailbox (roughly 1600 emails in INBOX and about a dozen other folders) that showed up perfectly on my iphone. Now it's been synced to the new dovecot server via imap and a whole month of messages seems to be missing. I checked on the server, via webmail and with outlook and everything is where it should be. The problem shows up on Apple devices (same thing happened on a couple of ipads). I haven't tried rebuilding the index or wiping out a phone to see if that resolves the problem, but before I do that I'd like to know if anyone experienced the same issue and how they fixed it Thanks! Kurt

2 3

Re: [Dovecot] A small bug and a question about CONTEXT=SEARCH
by Anders 31 Jan '12

31 Jan '12

Hi, My colleague just pointed me to the recent fix of this issue, thanks!

1 0

[Dovecot] Help required
by Deepa Malleeswaran 31 Jan '12

31 Jan '12

Hi I use dovecot on CentOS. It was installed and configured by some other person who doesn't work here anymore. I am trying to renew ssl. But the command works fine and restarts the dovecot. But the license shows the same old expiry. Can you please help me with the same. When I type in dovecot --version, I get command not found. Please guide me! Regards, -- Deepa Malleeswaran

2 1

[Dovecot] movming mail out of alt storage
by Micah Anderson 31 Jan '12

31 Jan '12

I moved some mail into the alt storage: doveadm altmove -u johnd(a)example.com seen savedbefore 1w and now I want to move it back to the regular INBOX, but I can't see how I can do that with either 'altmove' or 'mailbox move'. thanks! micah --

3 5

Re: [Dovecot] Mountpoints
by Joseph Tam 31 Jan '12

31 Jan '12

On Mon, 30 Jan 2012, dovecot-request(a)dovecot.org wrote: > So, I was thinking about adding doveadm commands to explicitly tell > Dovecot about the mountpoints that it needs to care about. When no > mountpoints are defined Dovecot would behave as it does now. Maybe I don't understand the subtlety of your question, but are you trying to disambiguate between a mounted filesytem and a failed mount that presents the underlying filesystem (which looks like an uninitilized index directory)? Couldn't you write some cookie file "/mount/.../dovecot-data-root/.dovemount", whose existence will tell you whether the FS is mounted without trying to find the mount root. Oh, but then again if you have per-user mounts, that's going to get messy. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] INBOX and IMAP forlders on differents machines ?
by Frank Bonnet 30 Jan '12

30 Jan '12

Hello In MBOX format would it be possible with dovecot 2 to have two machines one containing the INBOX and the other containing IMAP folders. Of course this need a frontend but would it be possible ? thanks

2 1

[Dovecot] Director to keep redirecting users to the same server even after all sessions closed?
by Mark Zealey 30 Jan '12

30 Jan '12

Hi there, Just wondering how easy it would be to make the director continue to send a user to the same server (assuming it's still in the pool) for say 90 seconds after they have last been active (ie lmtp or pop/imap)? Basically we are working in quite a heavily cached environment so it takes perhaps 60-90 seconds for our imap servers to properly flush to our network storage meaning if the user got put on a different server in that time we would see some issues. Presently we have fixed proxying, but I'd really like to use the director if possible to allow us to more easily add & remove servers. Mark

3 2

[Dovecot] UID 0 problem while issuing an UID THREAD REFS command
by Jesús M. Navarro 30 Jan '12

30 Jan '12

Hi: This is my first message to this list, so pleased to meet you all. Using dovecot 2.0.17 from packages at xi.rename-it.nl on a Debian "Squeeze" i686. Mail storage is a local ext3 partition (I attached the output of dovecot -n to this message). I'm having problems on a maildir due to dovecot returning an UID 0 to an UID THREAD REFS command: in <== TAG5 UID THREAD REFS us-ascii SINCE 18-Jul-2011 out <== * THREAD (0)(51 52)(53)(54 55 56)(57)(58)(59 60)(61) TAG5 OK Thread completed. The issuer is an atmail webmail that after the previous output will try an UID FETCH 0 that will fail with a "TAG6 BAD Error in IMAP command UID FETCH: Invalid uidset" message. I think that, as per a previous answer from Timo Sirainen*1, this should be considered a dovecot's bug, am I right? Anyway, what should I try to find why is this exactly happening? TIA *1 http://www.dovecot.org/list/dovecot/2011-November/061992.html

2 4

[Dovecot] problem compiling imaptest under solaris
by Jürgen Obermann 30 Jan '12

30 Jan '12

Hallo, today I tried to compile imaptest under solaris 10 with studio 11 compiler and got the following error: gmake[2]: Entering directory `/net/fileserv/export/sunsrc/src/imaptest-20111119/src' source='client.c' object='client.o' libtool=no \ DEPDIR=.deps depmode=none /bin/bash ../depcomp \ cc -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include/dovecot -I/usr/local/include -fast -xarch=v8plusa -I/usr/sfw/include -c client.c "/opt/local/include/dovecot/imap-util.h", line 6: warning: useless declaration "client-state.h", line 6: warning: useless declaration "client.c", line 655: operand cannot have void type: op "==" "client.c", line 655: operands have incompatible types: const void "==" int cc: acomp failed for client.c what can I do? Thanks for any help, Jürgen -- Jürgen Obermann Hochschulrechenzentrum der Justus-Liebig-Universität Gießen Heinrich-Buff-Ring 44 Tel. 0641-9913054

2 2

[Dovecot] Mountpoints
by Timo Sirainen 30 Jan '12

30 Jan '12

I've been thinking about mountpoints recently. There have been a few problems related to them: - If dbox mails and indexes are in different filesystems, and index fs isn't mounted and mailbox is accessed -> Dovecot rebuilds indexes from scratch, which changes UIDVALIDITY, which causes client to redownload mails. All mails will also show up as unread. Once index fs gets mounted again, the UIDVALIDITY changes again and client again redownloads mails. What should happen instead is that Dovecot simply refuses to rebuild indexes when the index fs isn't mounted. This isn't as critical for mbox/maildir, but probably a good idea to do there as well. - If dbox's alternative storage isn't mounted and a mail from there is tried to be accessed -> Dovecot rebuilds indexes and sees that all mails in alt path are gone, so Dovecot also deletes them from indexes as well. Once alt fs is mounted again, the mails in there won't come back without manual index rebuild and then they have also lost flags and have updated UIDs causing clients to redownload them. So again what should happen is that Dovecot won't rebuild indexes while alt fs isn't mounted. - For dsync-based replication I need to keep a state of each mountpoint (online, offline, failover) to determine how to access user's mails. So in the first two cases the main problem is: How does Dovecot know where a mountpoint begins? If the mountpoint is actually mounted there is no problem, because there are functions to find it (e.g. from /etc/mtab). So how to find a mountpoint that should exist, but doesn't? In some OSes Dovecot could maybe read and parse /etc/fstab, but that doesn't exist in all OSes, and do all installations even have all of the filesystems listed there anyway? (They could be in some startup script.) So, I was thinking about adding doveadm commands to explicitly tell Dovecot about the mountpoints that it needs to care about. When no mountpoints are defined Dovecot would behave as it does now. doveadm mount add|remove <path> - add/remove mountpoint doveadm mount state [<path> [<state>]] - get/set state of mountpoint (used by replication) - if path isn't given list states of all mountpoints List of mountpoints is kept in /var/lib/dovecot/mounts. But because the dovecot directory is only accessible to root (and probably too much trouble to change that), there's another list in /var/run/dovecot/mounts. This one also contains the states of the mounts. When Dovecot starts up and can't find the mounts from rundir, it creates it from vardir's mounts. When mail processes notice that a directory is missing, it usually autocreates it. With mountpoints enabled, Dovecot first finds the root mountpoint for the directory. The mount root is stat()ed and its parent is stat()ed. If their device numbers equal, the filesystem is unmounted currently, and Dovecot fails instead of creating a new directory. Similar logic is used to avoid doing a dbox rebuild if its alt dir is currently in unmounted filesystem. The main problem I see with all this is how to make sysadmins remember to use these commands when they add/remove mountpoints?.. Perhaps the additions could be automatic at startup. Whenever Dovecot sees a new mountpoint, it's added. If an old mountpoint doesn't exist at startup a warning is logged about it. Of course many of the mountpoints aren't intended for mail storage. They could be hidden from the "mount state" list by setting their state to "ignore". Dovecot could also skip some of the common known mountpoints, such as where type is proc/tmpfs/sysfs. Thoughts?

1 1

[Dovecot] A namespace error on 2.1rc5
by Bill Ryder 30 Jan '12

30 Jan '12

Hello all, I'm not sure if this is a bug. It's probably just an upgrade note. In summary I had no namespace section in my 2.0.17 config. When trying out 2.1rc5 no user could login because of a namespace error. 2.1rc5 adds a default namespace clause which broke my logins (It was noted in the changelog) I seemed to fix it by just putting this in the config file: namespace inbox { inbox = yes } Long story: I've been recently testing dovecot against cyrus to decide where we should go for our next mail server(s) I loaded up the mail server with mail delivered via postfix all on dovecot 2.0.15 (I've since moved to 2.0.17) I have three dovecot directors, two backends on the same NFS mail store. With dovecot 2.0.xx the tester works fine (it't just a script which logins in and emulates thunderbird when a user is idle - without using IDLE so the client asks for mail every few minutes). When I moved to 2.1rc5 I got namespace errors and the user can not login. The server said: dovecot-error.log-20120128:Jan 27 13:37:59 imap(ethab01): Error: user ethab01: Initialization failed: namespace configuration error: inbox=yes namespace missing The client says: * BYE Internal error occurred. Refer to server log for more information. The session looks like 0.000000 192.168.121.37 -> 192.168.121.2 TCP 33213 > imap [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=1056649457 TSER=0 WS=5 0.000036 192.168.121.2 -> 192.168.121.37 TCP imap > 33213 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1460 TSV=3264407631 TSER=1056649457 WS=7 0.000187 192.168.121.37 -> 192.168.121.2 TCP 33213 > imap [ACK] Seq=1 Ack=1 Win=5856 Len=0 TSV=1056649458 TSER=3264407631 0.006338 192.168.121.2 -> 192.168.121.37 IMAP Response: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready. 0.006889 192.168.121.37 -> 192.168.121.2 TCP 33213 > imap [ACK] Seq=1 Ack=124 Win=5856 Len=0 TSV=1056649465 TSER=3264407637 0.006973 192.168.121.37 -> 192.168.121.2 IMAP Request: I ID ("x-originating-ip" "192.168.114.249" "x-originating-port" "49403" "x-connected-ip" "192.168.121.37" "x-connected-port" "143") 0.006980 192.168.121.2 -> 192.168.121.37 TCP imap > 33213 [ACK] Seq=124 Ack=178 Win=6912 Len=0 TSV=3264407638 TSER=1056649465 0.007086 192.168.121.2 -> 192.168.121.37 IMAP Response: * ID NIL 0.018471 192.168.121.2 -> 192.168.121.37 IMAP Response: * BYE Internal error occurred. Refer to server log for more information. (interestingly the tshark output strips out the user name and password which is convenient but which may mean there's not enough information?) I rolled back to 2.0.17 and it was fine again. It's the same config files for both, same maildirs etc etc. All I did was change the dovecot version from 2.0.17 to 2.1rc5 However I see from the changelog that 2.1rc5 added a default namespace inbox: diff doveconf-n.2.0.17 doveconf-n.2.1-rc5 1c1 < # 2.0.17 (684381041dc4+): /etc/dovecot/dovecot.conf --- > # 2.1.rc5: /etc/dovecot/dovecot.conf 20a21,39 > namespace inbox { > location = > mailbox Drafts { > special_use = \Drafts > } > mailbox Junk { > special_use = \Junk > } > mailbox Sent { > special_use = \Sent > } > mailbox "Sent Messages" { > special_use = \Sent > } > mailbox Trash { > special_use = \Trash > } > prefix = > } We had this section commented out in 2.0.x so there was no namespace inbox anywhere. ============== doveconf -n for 2.0.17 (for the backends) # 2.0.17 (684381041dc4+): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-131.6.1.el6.x86_64 x86_64 Scientific Linux release 6.1 (Carbon) nfs auth_mechanisms = plain login auth_username_format = %n auth_verbose = yes debug_log_path = /var/log/dovecot/dovecot-debug.log disable_plaintext_auth = no first_valid_uid = 200 info_log_path = /var/log/dovecot/dovecot-info.log log_path = /var/log/dovecot/dovecot-error.log mail_debug = yes mail_fsync = always mail_gid = vmail mail_location = maildir:/vol/dt_mailstore1/spool/%n:INDEX=/var/indexes/%n mail_nfs_storage = yes mail_plugins = " fts fts_solr mail_log notify quota" mail_uid = vmail maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { driver = pam } plugin { autocreate = Trash autocreate2 = Drafts autocreate3 = Sent autocreate4 = Templates autosubscribe = Trash autosubscribe2 = Drafts autosubscribe3 = Sent autosubscribe4 = Templates fts = solr fts_solr = break-imap-search debug url=http://dovecot-solr1.wetafx.co.nz:8080/solr/ mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-userdb { group = vmail user = vmail } } service lmtp { inet_listener lmtp { address = 192.168.121.2 127.0.0.1 port = 24 } process_min_avail = 20 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/vol/dt_mailstore1/%n/%u driver = passwd } protocol lmtp { mail_plugins = sieve } protocol lda { mail_plugins = " fts fts_solr mail_log notify quota sieve" } protocol imap { mail_plugins = " fts fts_solr mail_log notify quota imap_quota" } protocol sieve { managesieve_notify_capability = managesieve_sieve_capability = } ===== doveconf for 2.1rc5 # 2.1.rc5: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-131.6.1.el6.x86_64 x86_64 Scientific Linux release 6.1 (Carbon) nfs auth_mechanisms = plain login auth_username_format = %n auth_verbose = yes debug_log_path = /var/log/dovecot/dovecot-debug.log disable_plaintext_auth = no first_valid_uid = 200 info_log_path = /var/log/dovecot/dovecot-info.log log_path = /var/log/dovecot/dovecot-error.log mail_debug = yes mail_fsync = always mail_gid = vmail mail_location = maildir:/vol/dt_mailstore1/spool/%n:INDEX=/var/indexes/%n mail_nfs_storage = yes mail_plugins = " fts fts_solr mail_log notify quota" mail_uid = vmail maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { autocreate = Trash autocreate2 = Drafts autocreate3 = Sent autocreate4 = Templates autosubscribe = Trash autosubscribe2 = Drafts autosubscribe3 = Sent autosubscribe4 = Templates fts = solr fts_solr = break-imap-search debug url=http://dovecot-solr1.wetafx.co.nz:8080/solr/ mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-userdb { group = vmail user = vmail } } service lmtp { inet_listener lmtp { address = 192.168.121.2 127.0.0.1 port = 24 } process_min_avail = 20 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/vol/dt_mailstore1/%n/%u driver = passwd } protocol lmtp { mail_plugins = sieve } protocol lda { mail_plugins = " fts fts_solr mail_log notify quota sieve" } protocol imap { mail_plugins = " fts fts_solr mail_log notify quota imap_quota" } protocol sieve { managesieve_notify_capability = managesieve_sieve_capability = }

1 0

[Dovecot] 2.1.rc3 (1a722c7676bb): Panic: file ostream.c: line 173 (o_stream_sendv): assertion failed: (stream->stream_errno != 0)
by Pascal Volk 30 Jan '12

30 Jan '12

Hi Timo, today some imap processes are crashed. Regards, Pascal -- The trapper recommends today: f007ba11.1201322(a)localdomain.org

1 1

[Dovecot] imap-login process_limit reached
by Don Buchholz 29 Jan '12

29 Jan '12

I've been having some problems with IMAP user connections to the Dovecot (v2.0.8) server. The following message is being logged. Jan 16 10:51:36 postal dovecot: master: Warning: service(imap-login): process_limit reached, client connections are being dropped The server is running Red Hat Enterprise Linux release 4 (update 6). Dovecot is v2.0.8. We have only 29 user accounts in /etc/dovecot/users. There were 196 "dovecot/imap" processes and 6 other dovecot processes, for a total of 202 "dovecot" processes, listed in the 'ps aux' output when problems were being experienced. Stopping and restarting the Dovecot system fixes the problem -- for a while. The 'doveconf -n' output is attached. I have not set any "process_limit" values, and I don't think I'm getting anywhere close to the 1024 default, so I'm pretty confused as to what might be wrong. Any suggestions on what to do next are appreciated. Thanks, - Don ------------------------------------------------------------------------ # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.9-67.0.1.ELsmp i686 Red Hat Enterprise Linux WS release 4 (Nahant Update 6) ext3 auth_username_format = %Lu auth_verbose = yes auth_verbose_passwords = sha1 login_log_format_elements = user=<%u> service=%Us method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = xx.xx.xx.0/24 mail_location = maildir:/Virtual_Users/%u/Mail passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } passdb { driver = pam } ssl_ca = </etc/dovecot/ssl/iMove_2011_CAcert.pem ssl_cert = </etc/dovecot/ssl/postal_cert.pem ssl_key = </etc/dovecot/ssl/postal_key+req.pem ssl_key_password = ********** ssl_parameters_regenerate = 12 userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } userdb { driver = passwd } verbose_proctitle = yes protocol imap { ssl_cert = </etc/dovecot/ssl/imap_cert.pem ssl_key = </etc/dovecot/ssl/imap_key+req.pem ssl_key_password = </etc/dovecot/ssl/imap.pw } protocol pop3 { ssl_cert = </etc/dovecot/ssl/pop3_cert.pem ssl_key = </etc/dovecot/ssl/pop3_key+req.pem ssl_key_password = </etc/dovecot/ssl/pop3.pw }

5 16

[Dovecot] XFS Developer Takes Shots At Btrfs, EXT4
by Adrian Minta 29 Jan '12

29 Jan '12

Nice article about XFS improvements: http://tinyurl.com/7pvr9ju

2 2

[Dovecot] 2.1.rc1 (056934abd2ef): virtual plugin mailbox search pattern
by e-frog 29 Jan '12

29 Jan '12

Hello Timo, With dovecot 2.1.rc1 (056934abd2ef) there seems to be something wrong with virtual plugin mailbox search patterns. I'm using a virtual mailbox 'unread' with the following dovecot-virtual file $ cat dovecot-virtual * unseen For testing propose I created the following folders with each containing one unread message INBOX, INBOX/level1 and INBOX/level1/level2 2.1.rc1 (056934abd2ef) 1 LIST "" "*" * LIST (\HasChildren) "/" "INBOX" * LIST (\HasChildren) "/" "INBOX/level1" * LIST (\HasNoChildren) "/" "INBOX/level1/level2" * LIST (\HasChildren) "/" "virtual" * LIST (\HasNoChildren) "/" "virtual/unread" 1 OK List completed. 2 STATUS "INBOX" (UNSEEN) * STATUS "INBOX" (UNSEEN 1) 2 OK Status completed. 3 STATUS "INBOX/level1" (UNSEEN) * STATUS "INBOX/level1" (UNSEEN 1) 3 OK Status completed. 4 STATUS "INBOX/level1/level2" (UNSEEN) * STATUS "INBOX/level1/level2" (UNSEEN 1) 4 OK Status completed. 5 STATUS "virtual/unread" (UNSEEN) * STATUS "virtual/unread" (UNSEEN 1) 5 OK Status completed. Result: virtual/unread shows only 1 unseen message. Further tests showed it's the one from INBOX. The mails from the deeper levels are not found. Downgrading to 2.0.16 restores the correct behavior: 1 LIST "" "*" * LIST (\HasChildren) "/" "INBOX" * LIST (\HasChildren) "/" "INBOX/level1" * LIST (\HasNoChildren) "/" "INBOX/level1/level2" * LIST (\HasChildren) "/" "virtual" * LIST (\HasNoChildren) "/" "virtual/unread" 1 OK List completed. 2 STATUS "INBOX" (UNSEEN) * STATUS "INBOX" (UNSEEN 1) 2 OK Status completed. 3 STATUS "INBOX/level1" (UNSEEN) * STATUS "INBOX/level1" (UNSEEN 1) 3 OK Status completed. 4 STATUS "INBOX/level1/level2" (UNSEEN) * STATUS "INBOX/level1/level2" (UNSEEN 1) 4 OK Status completed. 5 STATUS "virtual/unread" (UNSEEN) * STATUS "virtual/unread" (UNSEEN 3) 5 OK Status completed. Result: virtual/unread shows 3 unseen messages as it should The namespace configuration is as following namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { location = virtual:~/virtual prefix = virtual/ separator = / subscriptions = no type = private } I've also tried this with location = virtual:~/virtual:LAYOUT=maildir++ leading to the same result. Thanks, e-frog

2 3

[Dovecot] Migration to multi-dbox and SiS
by Ronald MacDonald 29 Jan '12

29 Jan '12

Dear list, A huge thank-you first of all for all the work that's gone into Dovecot itself. I'm rebuilding a mail server next week and so, taking the rare opportunity to re-consider all the options I've had running over the past couple of years. Around the time of the last re-build (2010), there had been some discussion on single instance storage, which was quite new on Dovecot around then. I chickened out of setting it up though. Now with it having been in the wild for a couple of years, I wonder, how have people found SiS to behave? Additionally, though there was talk of the prospect of it being merged with 2.x am I right in thinking it's not yet in the main project? Couldn't find any 2.x changelogs that could confirm this. With best wishes, Ronald.

2 1

[Dovecot] Attribute Cache flush errors on FreeBSD 8.2
by Phil Kernick 29 Jan '12

29 Jan '12

I'm running dovecot 2.0.16 on FreeBSD 8.2 with the mail spool and indexes on an NFS server. Lines like the following keep appearing in syslog for access to each mailbox: Error: nfs_flush_attr_cache_fd_locked: fchown(/home/philk/Mail/Deleted) failed: Bad file descriptor This is coming from nfs-workarounds.c line 210, which tracing back seems to be coming from the call to mbox_lock on lib-storage/index/mbox/mbox-lock.c line 774. I have /home mounted with options acregmin=0,acregmax=0,acdirmin=0,acdirmax=0 (as FreeBSD doesn't have a noac option), but it throws the same error either way. The output of dovecot -n is below. Phil. # 2.0.16: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-RELEASE-p3 i386 auth_mechanisms = plain login auth_username_format = %Lu disable_plaintext_auth = no first_valid_gid = 1000 first_valid_uid = 1000 listen = *, [::] mail_fsync = always mail_location = mbox:~/Mail/:INBOX=/var/mail/%u mail_nfs_index = yes mail_nfs_storage = yes mail_privileged_group = mail mmap_disable = yes passdb { args = session=yes dovecot driver = pam } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = blocking=yes driver = passwd } verbose_proctitle = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { postmaster_address = postmaster(a)example.com sendmail_path = /usr/sbin/sendmail }

2 1

[Dovecot] 2.0.17: Index lost -> SAVEDON lost as well?
by Ralf Hildebrandt 29 Jan '12

29 Jan '12

Today I encoundered these errors: Jan 9 08:30:06 mail dovecot: lmtp(31174, backup(a)backup.invalid) Error: Log synchronization error at seq=858,offset=44672 for /home/mailboxname/mdbox/storage/dovecot.map.index: Append with UID 282388, but next_uid = 282389 Jan 9 08:30:06 mail dovecot: lmtp(31819, backup(a)backup.invalid) Error: Log synchronization error at seq=858,offset=44672 for /home/mailboxname/mdbox/storage/dovecot.map.index: Append with UID 282388, but next_uid = 282389 Jan 9 08:30:06 mail dovecot: lmtp(32148, backup(a)backup.invalid) Error: Log synchronization error at seq=858,offset=44672 for /home/mailboxname/mdbox/storage/dovecot.map.index: Append with UID 282388, but next_uid = 282389 After that, the SAVEDON date for all mails was reset to today: mail:~# doveadm search -u backup(a)backup.invalid mailbox INBOX SAVEDON 2012-01-09 | wc -l 75650 mail:~# doveadm search -u backup(a)backup.invalid mailbox INBOX SAVEDON 2012-01-08 | wc -l 0 mail:~# doveadm search -u backup(a)backup.invalid mailbox INBOX SAVEDON 2012-01-07 | wc -l 0 Before, I was running this: vorgestern=`date -d "-2 day" +"%Y-%m-%d"` doveadm expunge -u backup(a)backup.invalid mailbox INBOX SAVEDBEFORE $vorgestern doveadm purge -u backup(a)backup.invalid Is there a way of restoring the SAVEDON info? -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 4

[Dovecot] compressed mboxes very slow
by kjonca＠o2.pl 29 Jan '12

29 Jan '12

I have some archive mails in gzipped mboxes. I could use them with dovecot 1.x without problems. But recently I have installed dovecot 2.0.12, and they are slow. very slow. Creating index files takes about 10 minutes for ~20M file with 560 messages for bzipped mbox, for gzipped is little better but still unusable :( Stracing dovecot process shows that every ~ 20 messages it rereads complete mbox file. Am I doing something wrong? KJ -- http://modnebzdury.wordpress.com/2009/10/01/niewiarygodny-list-prof-majewsk…

4 13

[Dovecot] maildir vs mdbox
by Jean-Daniel Beaubien 29 Jan '12

29 Jan '12

Hi, I am planning on running on test between maildir and mdbox to see which is a better fit for my use case. And I'm just looking for general advice/recommendation. I will post any results I obtain here. Important question: I have multiple users hitting the same email account at the same time. Can be a problem with mdbox? (either via thunderbird or with custom webmail apps). I remember having huge issues with mbox a decade ago because of this. Maildir fixed this... will mdbox reintroduce this problem? This is a very important point for me. Here is my use case: - Ubuntu server (any specific recommandations on FS to use?) - Standard PC hardware (core i5 or i7, few gigs of ram, hdds at first, probably ssd afterwards, nothing very fancy) - Serving only a hand full of email accounts but some of the accounst have over 3 millions emails in them (with individual mail folders having 100k+ emails) - Will use latest dovecot (2.1 when it comes out) - fts-lucene or fts-solr? -jd

2 5

[Dovecot] sieve under lmtp using wrong homedir ?
by Frank Post 29 Jan '12

29 Jan '12

Hi, i have a problem with dovecot-2.0.15. All is working well except lmtp. Sieve scripts are correctly saved under /var/vmail/test.com/test/sieve, but under lmtp sieve will use /var/vmail//testuser/ Uid testuser has mail=test(a)test.com configured in ldap. As i could see in the debug logs, there is a difference between the auth "master out" lines, but why ? working if managesieve stores scripts: Jan 11 15:02:42 auth: Debug: master in: REQUEST 3533701121 23001 1 7ec31d3c65cb934785e8eb0f33a182ae Jan 11 15:02:42 auth: Debug: ldap(test(a)test.com,10.234.201.4): result: mail(user)=test(a)test.com Jan 11 15:02:42 auth: Debug: master out: USER 3533701121 test(a)test.com home=/var/vmail/test.com/test uid=5000 gid=5000 Jan 11 15:02:42 managesieve(test(a)test.com): Debug: Effective uid=5000, gid=5000, home=/var/vmail/test.com/test but under lmtp not: Jan 11 14:39:53 auth: Debug: master in: USER 1 testuser service=lmtp lip=10.234.201.9 rip=10.234.201.4 Jan 11 14:39:53 auth: Debug: auth(testuser,10.234.201.4): username changed testuser -> test(a)test.com Jan 11 14:39:53 auth: Debug: ldap(test(a)test.com,10.234.201.4): result: mail(user)=test(a)test.com Jan 11 14:39:53 auth: Debug: master out: USER 1 test(a)test.com home=/var/vmail//testuser uid=5000 gid=5000 Jan 11 14:39:53 lmtp(8499): Debug: auth input: test(a)test.com home=/var/vmail//testuser uid=5000 gid=5000 Jan 11 14:39:53 lmtp(8499): Debug: changed username to test(a)test.com Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: Effective uid=5000, gid=5000, home=/var/vmail//testuser Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: Quota root: name=User quota backend=maildir args= Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: Quota warning: bytes=1932735283 (90%) messages=0 reverse=no command=quota-warning 90 test(a)test.com Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: maildir++: root=/var/vmail/test.com/test/Maildir, index=/var/dovecot/indexes/test.com/test, control=, inbox=/var/vmail/test.com/test/Maildir, alt= Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: trash: No trash setting - plugin disabled Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: pla8CymRDU8zIQAAFrfQGQ: sieve: user's script path /var/vmail//testuser/.dovecot.sieve doesn't exist (using global script path in stead) Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: pla8CymRDU8zIQAAFrfQGQ: sieve: user has no valid personal script Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: pla8CymRDU8zIQAAFrfQGQ: sieve: no scripts to execute: reverting to default delivery. Jan 11 14:39:53 lmtp(8499, test(a)test.com) Debug: Namespace : Using permissions from /var/vmail/test.com/test/Maildir: mode=0700 gid=-1 Thanks, for your help. Frank

2 1

Re: [Dovecot] A small bug and a question about CONTEXT=SEARCH
by Anders 29 Jan '12

29 Jan '12

On Tue, 2012-01-10 at 15:05 +0100, Anders wrote: > > the socket connection being closed without warning: > > UID SEARCH RETURN (SAVE COUNT) CHARSET UTF-8 (UNDELETED TEXT "foo") > > You mean it closes with above also? It works fine with me. No, that also works fine here :-) > > UID SEARCH RETURN (COUNT MIN) CHARSET UTF-8 () $ > > This was fixed in v2.0.17. Great, thanks! > > Then I have question about RFC5267 and the announcement of > > CONTEXT=SEARCH > > in the capabilities. I think this RFC is supported by dovecot, or maybe > > just part of the RFC is supported? > > All of it is supported, as far as I know. > > At least when I include the CONTEXT ADDTO or REMOVEFROM keywords I get > > an error, > These are server notifications. Clients aren't supposed to send them. Sorry, apparently I was a bit too fast there. ADDTO and REMOVEFROM should not be sent by a client, but I think that a client can send CONTEXT as a hint to the server, see http://tools.ietf.org/html/rfc5267#section-4.2 Thanks! Regards Anders

2 1

[Dovecot] howto disable indexing on dovecot-lda ?
by Adrian Minta 28 Jan '12

28 Jan '12

Hello, is it possible to disable indexing on dovecot-lda ? Right now postfix delivers the mail directly to the nfs server without any problems. If I switch to dovecot-lda the system crashes do to the high I/O and locking. Indexing on lda is not very useful because the number of of imap logins is less than 5% that of incoming mails, so an user could wait for 3 sec to get his mail index, but a new mail can't. Dovecot version 1.2.15 mail_nfs_storage = yes mail_nfs_index = yes Than you !

3 8

[Dovecot] dovecot 2.0.15 - purge errors
by kjonca＠o2.pl 28 Jan '12

28 Jan '12

Dovecot 2.0.15, debian package, am I lost some mails? How can I check what is in *.broken file? --8<---------------cut here---------------start------------->8--- $doveadm -v purge doveadm(kjonca): Error: Corrupted dbox file /home/kjonca/Mail/0/storage/m.6469 (around offset=291530): purging found mismatched offsets (291500 vs 299692, 60/215) doveadm(kjonca): Warning: mdbox /home/kjonca/Mail/0/storage: rebuilding indexes doveadm(kjonca): Error: Corrupted dbox file /home/kjonca/Mail/0/storage/m.6469 (around offset=599914): metadata header has bad magic value doveadm(kjonca): Warning: dbox: Copy of the broken file saved to /home/kjonca/Mail/0/storage/m.6469.broken doveadm(kjonca): Warning: Transaction log file /home/kjonca/Mail/0/storage/dovecot.map.index.log was locked for 211 seconds doveadm(kjonca): Error: Purging namespace '' failed: Internal error occurred. Refer to server log for more information. [2012-01-13 06:45:07] --8<---------------cut here---------------end--------------->8--- doveconf -n --8<---------------cut here---------------start------------->8--- # 2.0.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38+3-64 x86_64 Debian wheezy/sid auth_debug = yes auth_mechanisms = digest-md5 cram-md5 login plain auth_verbose = yes listen = alfa log_path = /var/log/dovecot log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_location = mdbox:~/Mail/0 mail_log_prefix = "%Us(%u): " mail_plugins = zlib notify acl mail_privileged_group = mail namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { hidden = no inbox = no list = yes location = mbox:~/Mail/Old:CONTROL=~/Mail/.dovecot/control/Old:INDEX=~/Mail/.dovecot/index/Old prefix = "#Old/" separator = / subscriptions = yes type = private } passdb { args = scheme=PLAIN /etc/security/dovecot.pwd driver = passwd-file } plugin { acl = vfile mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size zlib_save = bz2 zlib_save_level = 9 } protocols = imap service auth { user = root } service imap-login { process_limit = 2 process_min_avail = 1 } service imap { vsz_limit = 512 M } service pop3-login { process_limit = 2 process_min_avail = 1 } service pop3 { vsz_limit = 512 M } ssl = no userdb { driver = passwd } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 20 mail_plugins = zlib imap_zlib mail_log notify acl } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol lda { deliver_log_format = msgid=%m: %$ log_path = ~/log/deliver.log postmaster_address = root@localhost } --8<---------------cut here---------------end--------------->8--- -- Gdyby ktoś miał zbędny Toshiba G450 - to chętnie przejmę ;) ---------------- Biologia poucza, ze jeśli cię coś ugryzło, to niemal pewne, ze była to samica.

2 2

[Dovecot] 2.1.rc3 (1a722c7676bb):dsync umlaut problems
by Pascal Volk 28 Jan '12

28 Jan '12

All umlauts in mailbox names are lost after converting mbox/Maildir mailboxes to mdbox. [location2 scp-ed from the old server] # ls -d /srv/import/Maildir/.Gel\&APY-schte\ Elemente/ /srv/import/Maildir/.Gel&APY-schte Elemente/ # dsync -u jane(a)example.com -v mirror maildir:/srv/import/Maildir/ … dsync(jane(a)example.com): Info: Gelöschte Elemente: only in dest … … # doveadm mailbox list -u jane(a)example.com Gel* Gel__schte_Elemente # ls -d mdbox/mailboxes/Gel* mdbox/mailboxes/Gel__schte_Elemente Regards, Pascal -- The trapper recommends today: cafefeed.1201303(a)localdomain.org

2 2

[Dovecot] where is subscribed list stored?
by Michael Makuch 28 Jan '12

28 Jan '12

I'm using $ /usr/sbin/dovecot --version 2.0.15 on $ cat /etc/fedora-release Fedora release 14 (Laughlin) and version 8 of Thunderbird. I use dovecot locally for internal only access to my email archives, of which I have many gigs of email archives. Over time I end up subscribing to a couple dozen different IMAP email folders. Problem is that periodically my list of subscribed folders get zapped to none, and I have to go and re-subscribe to a dozen or two folders again. Anyone seen this happen? It looks like the list of subscribed folders is here ~/Mail/.subscriptions and I can see in my daily backup that it reflects what appears in TBird. What might be zapping it? I use multiple email clients simultaneously on different hosts. (IOW I leave them open) Is this a problem? Does dovecot manage that in some way? Or is that my problem? I don't think this is the problem since this only occurs like a few times per year. If it were the problem I'd expect it to occur much more frequently. Thanks for any clues Mike

5 4

[Dovecot] Quota-warning and setresgid
by l.chelchowski 28 Jan '12

28 Jan '12

Hi! Please help me with this. The problem exists when quota-warning is executing: LOG: Jan 10 10:15:06 lmtp(85973): Debug: none: root=, index=, control=, inbox=, alt= Jan 10 10:15:06 lmtp(85973): Info: Connect from local Jan 10 10:15:06 lmtp(85973): Debug: Loading modules from directory: /usr/local/lib/dovecot Jan 10 10:15:06 lmtp(85973): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so Jan 10 10:15:06 lmtp(85973): Debug: Module loaded: /usr/local/lib/dovecot/lib90_sieve_plugin.so Jan 10 10:15:06 lmtp(85973): Debug: auth input: tester(a)domain.eu home=/home/vmail/domain.eu/tester/ mail=maildir:/home/vmail/domain.eu/tester/:INDEX=/var/mail/vmail/domain.eu/tester@domain.eu/index/public uid=101 gid=12 quota_rule=*:storage=2097 acl_groups= Jan 10 10:15:06 lmtp(85973): Debug: Added userdb setting: mail=maildir:/home/vmail/domain.eu/tester/:INDEX=/var/mail/vmail/domain.eu/tester@domain.eu/index/public Jan 10 10:15:06 lmtp(85973): Debug: Added userdb setting: plugin/quota_rule=*:storage=2097 Jan 10 10:15:06 lmtp(85973): Debug: Added userdb setting: plugin/acl_groups= Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Effective uid=101, gid=12, home=/home/vmail/domain.eu/tester/ Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota root: name=user backend=dict args=:proxy::quotadict Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota rule: root=user mailbox=* bytes=2147328 messages=0 Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota rule: root=user mailbox=Trash bytes=+429465 (20%) messages=0 Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota rule: root=user mailbox=SPAM bytes=+429465 (20%) messages=0 Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota warning: bytes=1717862 (80%) messages=0 reverse=no command=quota-warning 80 tester(a)domain.eu Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota warning: bytes=1932595 (90%) messages=0 reverse=no command=quota-warning 90 tester(a)domain.eu Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Quota warning: bytes=2039961 (95%) messages=0 reverse=no command=quota-warning 95 tester(a)domain.eu Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: dict quota: user=tester(a)domain.eu, uri=proxy::quotadict, noenforcing=0 Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/vmail/domain.eu/tester/:INDEX=/var/mail/vmail/domain.eu/tester@domain.eu/index/public Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: maildir++: root=/home/vmail/domain.eu/tester, index=/var/mail/vmail/domain.eu/tester(a)domain.eu/index/public, control=, inbox=/home/vmail/domain.eu/tester, alt= Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Namespace : type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=children, subscriptions=yes location=maildir:/home/vmail/public/:CONTROL=/var/mail/vmail/domain.eu/tester/control/public:INDEX=/var/mail/vmail/domain.eu/tester/index/public:LAYOUT=fs Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: fs: root=/home/vmail/public, index=/var/mail/vmail/domain.eu/tester/index/public, control=/var/mail/vmail/domain.eu/tester/control/public, inbox=, alt= Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: Namespace : type=shared, prefix=Shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/:INDEX=/var/mail/vmail/domain.eu/tester@domain.eu/index/shared/%u Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: shared: root=/var/run/dovecot, index=, control=, inbox=, alt= ... Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Debug: quota: Executing warning: quota-warning 95 tester(a)domain.eu Jan 10 10:15:06 lmtp(85973, tester(a)domain.eu) Info: bLUfAJoBDE/VTwEA9hAjDg: sieve: msgid=<4F0C0180.3040704(a)domain.eu>: stored mail into mailbox 'INBOX' Jan 10 10:15:06 lmtp(85973): Info: Disconnect from local: Client quit (in reset) Jan 10 10:15:06 lda: Debug: Loading modules from directory: /usr/local/lib/dovecot Jan 10 10:15:06 lda: Debug: Module loaded: /usr/local/lib/dovecot/lib01_acl_plugin.so Jan 10 10:15:06 lda: Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so Jan 10 10:15:06 lda: Debug: Module loaded: /usr/local/lib/dovecot/lib90_sieve_plugin.so Jan 10 10:15:06 lda: Debug: auth input: tester(a)domain.eu home=/home/vmail/domain.eu/tester/ mail=maildir:/home/vmail/domain.eu/tester/:INDEX=/var/mail/vmail/domain.eu/tester@domain.eu/index/public uid=101 gid=12 quota_rule=*:storage=2097 acl_groups= Jan 10 10:15:06 lda: Debug: Added userdb setting: mail=maildir:/home/vmail/domain.eu/tester/:INDEX=/var/mail/vmail/domain.eu/tester@domain.eu/index/public Jan 10 10:15:06 lda: Debug: Added userdb setting: plugin/quota_rule=*:storage=2097 Jan 10 10:15:06 lda: Debug: Added userdb setting: plugin/acl_groups= Jan 10 10:15:06 lda(tester(a)domain.eu): Fatal: setresgid(12(mail),12(mail),101(vmail)) failed with euid=101(vmail): Operation not permitted Jan 10 10:15:06 master: Error: service(quota-warning): child 85974 returned error 75 dovecot -n # 2.0.16: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-RELEASE-p3 amd64 auth_master_user_separator = * auth_mechanisms = plain login cram-md5 auth_username_format = %Lu dict { quotadict = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf } disable_plaintext_auth = no first_valid_gid = 12 first_valid_uid = 101 log_path = /var/log/dovecot.log mail_debug = yes mail_gid = vmail mail_plugins = " quota acl" mail_privileged_group = vmail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / type = private } namespace { list = children location = maildir:/home/vmail/public/:CONTROL=/var/mail/vmail/%d/%n/control/public:INDEX=/var/mail/vmail/%d/%n/index/public:LAYOUT=fs prefix = Public/ separator = / subscriptions = yes type = public } namespace { list = children location = maildir:%%h/:INDEX=/var/mail/vmail/%d/%u/index/shared/%%u prefix = Shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } passdb { args = /usr/local/etc/dovecot/passwd.masterusers driver = passwd-file master = yes pass = yes } plugin { acl = vfile:/usr/local/etc/dovecot/acls acl_shared_dict = file:/usr/local/etc/dovecot/shared/shared-mailboxes.db autocreate = Trash autocreate2 = Junk autocreate3 = Sent autocreate4 = Drafts autocreate5 = Archives autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Sent autosubscribe4 = Drafts autosubscribe5 = Public/Poczta autosubscribe6 = Archives fts = squat fts_squat = partial=4 full=10 quota = dict:user::proxy::quotadict quota_rule2 = Trash:storage=+20%% quota_rule3 = SPAM:storage=+20%% quota_warning = storage=80%% quota-warning 80 %u quota_warning2 = storage=90%% quota-warning 90 %u quota_warning3 = storage=95%% quota-warning 95 %u sieve = ~/.dovecot.sieve sieve_before = /usr/local/etc/dovecot/sieve/default.sieve sieve_dir = ~/sieve sieve_global_dir = /usr/local/etc/dovecot/sieve sieve_global_path = /usr/local/etc/dovecot/sieve/default.sieve } protocols = imap pop3 sieve lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = mail mode = 0660 user = postfix } unix_listener auth-userdb { group = mail mode = 0660 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap { executable = imap postlogin } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve { drop_priv_before_exec = yes } service pop3 { drop_priv_before_exec = yes } service postlogin { executable = script-login rawlog } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl = no userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } verbose_proctitle = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = " acl imap_acl autocreate fts fts_squat quota imap_quota" } protocol lmtp { mail_plugins = quota sieve } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve acl quota postmaster_address = postmaster(a)domain.eu sendmail_path = /usr/sbin/sendmail } -- Łukasz

2 2

[Dovecot] [PATCH] autoconf small fix
by Luca Di Vizio 28 Jan '12

28 Jan '12

Hi Timo, the attached patch seems to solve a warning from autoconf: libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. Best regards, Luca

2 1

[Dovecot] Password auth scheme question with mysql
by Ed W 28 Jan '12

28 Jan '12

Hi, I have a current auth database using mysql with a "password" column in plain text. The config has "default_pass_scheme = PLAIN" specified In preparation for a more adaptable system I changed a password entry from "asdf" to "{PLAIN}asdf", but now auth fails. Works fine if I change it back to just "asdf". (I don't believe it's a caching problem) What might I be missing? I was under the impression that the password column can include a {scheme} prefix to indicate the password scheme (presumably this also means a password cannot start with a "{"?). Is this still true when using mysql and default_pass_scheme ? Thanks for any hints? Ed W

2 4

[Dovecot] Problem with Postfix + Dovecot + MySQL + Squirrelmail
by Gustavo 28 Jan '12

28 Jan '12

Dear friends, I try configure a webmail on my server using Postfix + Dovecot + MySQL + Squirrelmail. My system is a Debian6 and dovecot version is: #dovecot --version 1.2.15 But, when I try to access an account on squirrel I recieve this message: “ERROR Error connecting to IMAP server: localhost. 111 : Connection refused” Looking for a problem I foud this: #service dovecot start Starting IMAP/POP3 mail server: dovecotLast died with error (see error log for more information): Auth process died too early - shutting down If you have trouble with authentication failures, enable auth_debug setting. See http://wiki.dovecot.org/WhyDoesItNotWork This message goes away after the first successful login. . And the status of doveco is: #service dovecot status dovecot is not running ... failed! The other services seems to be OK: #service postfix status postfix is running. # service mysql status /usr/bin/mysqladmin Ver 8.42 Distrib 5.1.49, for debian-linux-gnu on x86_64 Copyright 2000-2008 MySQL AB, 2008 Sun Microsystems, Inc. This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL license Server version5.1.49-3 Protocol version10 ConnectionLocalhost via UNIX socket UNIX socket/var/run/mysqld/mysqld.sock Uptime:32 days 14 hours 23 min 39 sec Threads: 1 Questions: 6743 Slow queries: 0 Opens: 385 Flush tables: 1 Open tables: 47 Queries per second avg: 0.2. Looking at dovecot.conf I found some incosistences: On dovecot.conf: protocol lda { sendmail_path = /usr/lib/sendmail auth_socket_path = /var/run/dovecot/auth-master } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail group = mail } client { path = /var/run/dovecot/auth-client mode = 0660 user = vmail group = mail } } But in the system I don1t found this files!!! /var/run/dovecot# ls total 20K drwxr-xr-x 3 root root 4.0K Jan 27 11:35 . drwxr-xr-x 8 root root 4.0K Jan 27 09:33 .. srw------- 1 root root 0 Jan 27 11:35 auth-worker.26163 srwxrwxrwx 1 root root 0 Jan 27 11:35 dict-server lrwxrwxrwx 1 root root 25 Jan 27 11:35 dovecot.conf -> /etc/dovecot/dovecot.conf drwxr-x--- 2 root dovecot 4.0K Jan 27 11:35 login -rw------- 1 root root 43 Jan 27 11:35 master-fatal.lastlog -rw------- 1 root root 6 Jan 27 11:35 master.pid /var/run/dovecot# ls login/ total 12K drwxr-x--- 2 root dovecot 4.0K Jan 27 11:35 . drwxr-xr-x 3 root root 4.0K Jan 27 11:35 .. srw-rw---- 1 root dovecot 0 Jan 27 11:35 default -rw-r--r-- 2 root root 230 Jan 23 19:12 ssl-parameters.dat I think maybe that is the problem. Anyone knows how I fix that? Or what is the real problem? Thanks for any help! -- Gustavo

2 1

[Dovecot] v2.1.rc5 (85a9b5236b6c) Error: lmtp client: DNS lookup of $FQDN failed: connect(dns-client) failed: No such file or directory
by Pascal Volk 28 Jan '12

28 Jan '12

When the Sieve plugin tries to send a vacation message or redirect a message to another address it fails. dovecot: lmtp(6412, user(a)example.com) Error: lmtp client: DNS lookup of orange.example.com failed: connect(dns-client) failed: No such file or directory dovecot: lmtp(6412, user(a)example.com) Error: dAIOClYSJE8MGQAAhQ0vrQ: sieve: msgid=<4F241255.2060900(a)example.com>: failed to redirect message to <admin+user(a)example.com> (refer to server log for more information) But the dns-client sockets are created when Dovecot starts up: # find /usr/local/var/run/dovecot -name dns-client -exec ls -l {} + srw-rw-rw- 1 root staff 0 Jan 28 16:15 /usr/local/var/run/dovecot/dns-client srw-rw-rw- 1 root root 0 Jan 28 16:15 /usr/local/var/run/dovecot/login/dns-client Hum, is it Dovecot or Pigeonhole (dovecot-2.1-pigeonhole 1600:b2a456e15ed5)? Regards, Pascal -- The trapper recommends today: c01dcofe.1202816(a)localdomain.org

2 2

Re: [Dovecot] Crash on mail folder delete
by Daniel L. Miller 28 Jan '12

28 Jan '12

On 1/25/2012 4:04 PM, Daniel L. Miller wrote: > On 1/25/2012 3:43 PM, Daniel L. Miller wrote: >> On 1/25/2012 3:42 PM, Timo Sirainen wrote: >>> On 26.1.2012, at 1.37, Daniel L. Miller wrote: >>> >>>> Attempting to delete a folder from within the trash folder using >>>> Thunderbird. I see the following in the log: >>> Dovecot version? >>> >> 2.1.rc3. I'm compiling rc5 now... >> > Error still there on rc5. > Can I do anything to help find this? Folders are still shown in Trash - unable to delete. -- Daniel

2 1

[Dovecot] dovecot imap cluster
by Matteo Cazzador 28 Jan '12

28 Jan '12

Hello, i'm using postfix like smtp server, i need to choose an imap server with a special features. I have a customer with 3 different geographic locations. Every locations have a mail server for the same domain (example.com) If user1(a)example.com receive mail form external this mail going on every locations server. I've a problem now, is it possible to syncronize the state (mail flag) of user1 imap folder mails on every mail locations server? Example, if user1 read a mail on server one is it possible to change flag of the same mail file on server 2 and server 3? Is it possible to use dsync for it? I need something like imap cluster. Or an action in post processing imap mail read. I can't use distribuited file system. Thank's a lot -- Rispetta l'ambiente: se non ti è necessario, non stampare questa mail. ****************************************** Ing. Matteo Cazzador Email: mcazzador(a)gmail.com ******************************************

4 4

[Dovecot] Test suite?
by Kyle Lafkoff 28 Jan '12

28 Jan '12

Hi I am building a RPM for dovecot. Is there a test suite available I could use during the build to verify proper functionality? Thanks! Kyle

2 1

[Dovecot] v2.1.rc5 released
by Timo Sirainen 27 Jan '12

27 Jan '12

http://dovecot.org/releases/2.1/rc/dovecot-2.1.rc5.tar.gz http://dovecot.org/releases/2.1/rc/dovecot-2.1.rc5.tar.gz.sig I'm still lagging behind reading emails. v2.1.0 will be released after I've finished that. RC5 is already stable and used in production, but I want to make sure that I haven't missed anything important that was reported previously. Most of the recent fixed bugs existed also in v2.0 series. Changes since rc3: * Temporary authentication failures sent to IMAP/POP3 clients now includes the server's hostname and timestamp. This makes it easier to find the error message from logs. + auth: Implemented support for Postfix's "TCP map" sockets for user existence lookups. + auth: Idling auth worker processes are now stopped. This reduces error messages about MySQL disconnections. - director: With >2 directors ring syncing might have stalled during director connect/disconnect, causing logins to fail. - LMTP client/proxy: Fixed potential hanging when sending (big) mails - Compressed mails with external attachments (dbox + SIS + zlib) failed sometimes with bogus "cached message size wrong" errors. (I skipped rc4 release, because I accidentally tagged it too early in hg.)

5 8

Re: [Dovecot] auth-worker temporary failures causing lmtp 500 rejection
by Mark Zealey 26 Jan '12

26 Jan '12

Hi Timo thanks for the patch; I have now analyzed network dumps & discovered that the cause is actually our frontend mail servers not dovecot - we were delivering to the wrong lmtp port which we then use in the mysql query hence getting empty records. Sorry about this! Mark ________________________________________ From: Mark Zealey Sent: 26 January 2012 14:37 To: Timo Sirainen Cc: dovecot(a)dovecot.org Subject: RE: [Dovecot] auth-worker temporary failures causing lmtp 500 rejection I've tried reproducing by having long running auth queries in the sql and KILLing them on the server, restarting the mysql service, and setting max auth workers to 1 and running 2 sessions at the same time (with long-running auth queries), but to no effect. There must be something else going on here; I saw it in particular when exim on our frontend servers had queued a large number of messages and suddenly released them all at once hence the auth-worker hypothesis although the log messages do not support this. I'll try to see if I can trigger this manually although we have been doing some massively parallel testing previously and not seen this. Mark ________________________________________ From: Timo Sirainen [tss(a)iki.fi] Sent: 26 January 2012 12:31 To: Mark Zealey Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] auth-worker temporary failures causing lmtp 500 rejection On 26.1.2012, at 12.14, Mark Zealey wrote: > I'm using dovecot 2.0.16 with a mysql user database. From time to time when we have a big influx of messages (perhaps more than 30 concurrent rcpt to:<> sessions at the same time so no auth-workers free?) or when we have a transient issue connecting to the database server, we see the message: > > Jan 25 16:38:23 mailbox dovecot: auth-worker: sql(foo(a)bar.com,1.2.3.4): Unknown user This happens only when the SQL query doesn't return any rows, but does return success. > and the lmtp process returns: > > 550 5.1.1 <foo(a)bar.com> User doesn't exist: foo(a)bar.com > > This would be correct for a permanent error where the user doesn't exist in our database, however it seems to be doing this on transient errors too. Is this an issue with the code or perhaps some setting I have missed? The problem is that temporary errors are returning "unknown user". Can you reproduce this somehow? Like if you stop MySQL it always returns that "Unknown user"?

1 0

[Dovecot] auth-worker temporary failures causing lmtp 500 rejection
by Mark Zealey 26 Jan '12

26 Jan '12

Hi there, I'm using dovecot 2.0.16 with a mysql user database. From time to time when we have a big influx of messages (perhaps more than 30 concurrent rcpt to:<> sessions at the same time so no auth-workers free?) or when we have a transient issue connecting to the database server, we see the message: Jan 25 16:38:23 mailbox dovecot: auth-worker: sql(foo(a)bar.com,1.2.3.4): Unknown user and the lmtp process returns: 550 5.1.1 <foo(a)bar.com> User doesn't exist: foo(a)bar.com This would be correct for a permanent error where the user doesn't exist in our database, however it seems to be doing this on transient errors too. Is this an issue with the code or perhaps some setting I have missed? Thanks, Mark

4 4

[Dovecot] Persistence of UIDs
by Jean-Daniel Beaubien 26 Jan '12

26 Jan '12

Hi everyone, I have a question concerning UIDs. How persistant are they? I am thinking about building some form of webmail specialized for some specific business purpose and I am thinking of building a sort of cache in a DB by storing the email addr, date, subject and UID for quick lookups and search of correspondance. I am doing this because I am having issue with multiple people searching thru email folders that have 100k+ emails (which is another problem in itself, searches don't seem to scale well when folder goes above 60k emails). So to come back to my question, can I store the UIDs and reuse those UIDs later on to obtain the body of the email??? Or can the UIDs change on the server and they will not be valid anymore?. My setup is: - dovecot 1.x (will migrate to 2.x soon) - maildir - everything stored on an intel 320 SSD (index and maildir folder) Thanks, -JD

4 8

Re: [Dovecot] Imap Quota Exceeded - But Still Receiving Emails?
by Daniel L. Miller 26 Jan '12

26 Jan '12

On 1/25/2012 2:01 AM, Palatine Web Support wrote: > On 2012-01-25 05:38, Daniel L. Miller wrote: >> On 1/24/2012 8:35 AM, Palatine Web Support wrote: >>> >>> Here is my dovecot config: >>> >>> plugin { >>> quota = maildir:User Quota >>> quota_rule2 = Trash:storage=+100M >>> } >> [..] >>> >>> So it picks up my set quota of 3MB but dovecot is not rejecting >>> emails if I am over my quota. >>> >>> Can anyone help? >>> >> Is the quota plugin being loaded? What is the output of: >> >> doveconf | grep -B 2 plug > > The modules are being loaded. From the log file with debugging enabled: > > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Loading modules from > directory: /usr/lib/dovecot/modules/imap > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Module loaded: > /usr/lib/dovecot/modules/imap/lib10_quota_plugin.so > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Module loaded: > /usr/lib/dovecot/modules/imap/lib11_imap_quota_plugin.so > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Effective uid=150, > gid=8, home=/var/vmail/xxx.com/support > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Quota root: name=User > Quota backend=dirsize args= > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Quota rule: root=User > Quota mailbox=* bytes=3145728 messages=0 > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Quota rule: root=User > Quota mailbox=Trash bytes=104857600 messages=0 > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): maildir: > data=/var/vmail/xxx.com/support > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): maildir++: > root=/var/vmail/xxx.com/support, index=, control=, > inbox=/var/vmail/xxx.com/support > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Namespace : Using > permissions from /var/vmail/xxx.com/support: mode=0700 gid=-1 > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Disconnected: Logged > out bytes=82/573 > Jan 25 09:59:58 mail dovecot: IMAP(xxx(a)xxx.com): Disconnected: Logged > out bytes=269/8243 > I don't know if it makes any difference, but in your config file, try changing: plugin { quota = maildir:User Quota to plugin { quota = maildir:User quota (lowercase the "quota") -- Daniel

2 1

Re: [Dovecot] dovecot Digest, Vol 105, Issue 57
by Arun Gupta 26 Jan '12

26 Jan '12

Dear Sir, Thanks for your reply and I really agreed your point about 'reject mail for users over quota', but I don't want to do it if it is possible to without reject mails to deliver mails from spool to user's home directory automatically, kindly provide solution. I will be highly obliged all of you. -- Thanks & Regards, Arun Kumar Gupta > formate) automatically > Message-ID: <alpine.DEB.1.10.1201251327580.7664(a)flfnqz.fnat.pqnp.va> > Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII > > > Hi, > > I am using dovecot 2.0.16, and assigend globally procmailrc > (/etc/procmailrc) which delivers mails to user's home directory in maildir > formate. Also I assined quota to User through setquota (edquota) command, > If the quota excedded then this case user's mail store to > /var/spool/mail/user. After incresing quota how to delivered these mails > to user's home dir in maildir formate automatically. > > Thanks & Regards, > > Arun Kumar Gupta > Best practice is to reject mail for users over quota (as long as you do this during the smtp transaction... Otherwise, whats the point? (they can still fill up your server)... -- Best regards, Charles -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

[Dovecot] Crash on mail folder delete
by Daniel L. Miller 26 Jan '12

26 Jan '12

Attempting to delete a folder from within the trash folder using Thunderbird. I see the following in the log: Jan 25 15:36:22 bubba dovecot: imap(dmiller(a)amfes.com): Panic: file mailbox-list-fs.c: line 156 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) Jan 25 15:36:22 bubba dovecot: imap(dmiller(a)amfes.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x3efba) [0x7f5fe9f86fba] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x3f006) [0x7f5fe9f87006] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x17f5a) [0x7f5fe9f5ff5a] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x47287) [0x7f5fea214287] -> /usr/local/lib/dovecot/lib01_acl_plugin.so(+0x6c71) [0x7f5fe8b9cc71] -> /usr/local/lib/dovecot/lib01_acl_plugin.so(+0x6d47) [0x7f5fe8b9cd47] -> /usr/local/lib/dovecot/lib01_acl_plugin.so(acl_mailbox_allocated+0x9e) [0x7f5fe8ba061e] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(hook_mailbox_allocated+0x62) [0x7f5fea2085b2] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_alloc+0xb2) [0x7f5fea2073d2] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](cmd_delete+0x72) [0x409922] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](command_exec+0x3d) [0x4109ad] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete]() [0x40f97e] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete]() [0x40fa5d] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](client_handle_input+0x135) [0x40fc85] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](client_input+0x5f) [0x4105af] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f5fe9f93406] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9f) [0x7f5fe9f9448f] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f5fe9f933a8] -> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f5fe9f803b3] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](main+0x301) [0x418a61] -> /lib/libc.so.6(__libc_start_main+0xfe) [0x7f5fe9be3d8e] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete]() [0x4083f9] Jan 25 15:36:23 bubba dovecot: imap(dmiller(a)amfes.com): Panic: file mailbox-list-fs.c: line 156 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) Jan 25 15:36:23 bubba dovecot: imap(dmiller(a)amfes.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x3efba) [0x7f33673dafba] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x3f006) [0x7f33673db006] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x17f5a) [0x7f33673b3f5a] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x47287) [0x7f3367668287] -> /usr/local/lib/dovecot/lib01_acl_plugin.so(+0x6c71) [0x7f3365ff0c71] -> /usr/local/lib/dovecot/lib01_acl_plugin.so(+0x6d47) [0x7f3365ff0d47] -> /usr/local/lib/dovecot/lib01_acl_plugin.so(acl_mailbox_allocated+0x9e) [0x7f3365ff461e] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(hook_mailbox_allocated+0x62) [0x7f336765c5b2] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_alloc+0xb2) [0x7f336765b3d2] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](cmd_delete+0x72) [0x409922] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](command_exec+0x3d) [0x4109ad] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete]() [0x40f97e] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete]() [0x40fa5d] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](client_handle_input+0x135) [0x40fc85] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](client_input+0x5f) [0x4105af] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f33673e7406] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9f) [0x7f33673e848f] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f33673e73a8] -> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f33673d43b3] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete](main+0x301) [0x418a61] -> /lib/libc.so.6(__libc_start_main+0xfe) [0x7f3367037d8e] -> dovecot/imap [dmiller(a)amfes.com 192.168.0.91 delete]() [0x4083f9] Jan 25 15:36:23 bubba dovecot: imap(dmiller(a)amfes.com): Fatal: master: service(imap): child 6074 killed with signal 6 (core dumps disabled) Jan 25 15:36:23 bubba dovecot: imap(dmiller(a)amfes.com): Fatal: master: service(imap): child 6589 killed with signal 6 (core dumps disabled) -- Daniel

2 2

[Dovecot] FOSDEM
by Timo Sirainen 26 Jan '12

26 Jan '12

I'll be in FOSDEM giving a small lightning talk about Dovecot: http://fosdem.org/2012/schedule/event/dovecot I'll also be around in FOSDEM the whole time, so if you're there and want to talk to me about anything, send me an email at some point. Poll to dovecot-news list people: Do you want to see these kind of news about my upcoming talks sent to the list? Probably happens a few times/year. A simple "yes" or "no" reply to this mail privately to me is enough.

2 1

[Dovecot] Dovecot antispam plugint got an empty message
by Petr Bravenec 25 Jan '12

25 Jan '12

Few weeks ago I upgraded dovecot from 1.2 to 2.0.16 and antispam plugin to 2.0_pre20101222. Since the upgrade I'm not able to move messages to my Junk folder. In the maillog I have found this message: dspam[25060]: empty message (no data received) Message is copied from my INBOX to Junk folder, but dspam got an empty message and sent an error return code. So the moving operation is not successfull and the original message in INBOX was not deleted. The dspam was not trained (got an empty message). Looking to source code of dspam and antispam plugin I suspect the dovecot not to sending any content to plugin. Can you help me, please? Petr Bravenec

3 2

Re: [Dovecot] Imap Quota Exceeded - But Still Receiving Emails?
by Daniel L. Miller 25 Jan '12

25 Jan '12

On 1/25/2012 1:39 AM, Palatine Web Support wrote: > On 2012-01-25 05:38, Daniel L. Miller wrote: >> On 1/24/2012 8:35 AM, Palatine Web Support wrote: >>> >>> Here is my dovecot config: >>> >>> plugin { >>> quota = maildir:User Quota >>> quota_rule2 = Trash:storage=+100M >>> } >> [..] >>> >>> So it picks up my set quota of 3MB but dovecot is not rejecting >>> emails if I am over my quota. >>> >>> Can anyone help? >>> >> Is the quota plugin being loaded? What is the output of: >> >> doveconf | grep -B 2 plug > > Hi Daniel > > I tried the command and it returned the command was not found. I have > installed: > > apt-get install dovecot-common > apt-get install dovecot-dev > apt-get install dovecot-imapd > > > Which package does the binary doveconf come from? You need to make sure to reply to the list - not just to me. If you don't have doveconf...what version of Dovecot are you using? -- Daniel

1 0

[Dovecot] move mails from spool to users home dir(maildir formate) automatically
by Arun Gupta 25 Jan '12

25 Jan '12

Hi, I am using dovecot 2.0.16, and assigend globally procmailrc (/etc/procmailrc) which delivers mails to user's home directory in maildir formate. Also I assined quota to User through setquota (edquota) command, If the quota excedded then this case user's mail store to /var/spool/mail/user. After incresing quota how to delivered these mails to user's home dir in maildir formate automatically. Thanks & Regards, Arun Kumar Gupta -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] Imap Quota Exceeded - But Still Receiving Emails?
by Palatine Web Support 25 Jan '12

25 Jan '12

Hello I am trying to setup dovecot maildir quota, but even though it seems to be working fine, I am still receiving emails into my inbox even though I have exceeded my quota. Here is my dovecot config: plugin { quota = maildir:User Quota quota_rule2 = Trash:storage=+100M } And my SQL config file for Dovecot (dovecot-sql.conf): user_query = SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as mail, 150 AS uid, 8 AS gid, CONCAT('*:storage=', quota) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' CONCAT('*:storage=', quota) AS quota_rule quota_rule = *:storage=3M So it picks up my set quota of 3MB but dovecot is not rejecting emails if I am over my quota. Can anyone help? Thanks. Carl

2 1

Re: [Dovecot] change smtp port
by Noel 24 Jan '12

24 Jan '12

On 1/23/2012 8:38 AM, Amira Othman wrote: > And there is no way to receive incoming emails not on port 25 ? > You can't randomly change the port you receive mail on because external MTAs have no way to find what port you're using. They will *always* use port 25 and nothing else. If your problem is that your Internet Service Provider is blocking port 25, you can contact them. Some ISPs will unblock port 25 on request, or might even have an online form you can fill out. If you can't get help from the ISP, you need a remailer service -- some outside proxy that accepts the mail for you and forwards connections to some different port on your computer. I don't know of any free services that do this; dyndns and others offer this for a fee, sometimes combined with spam/virus filtering. -- Noel Jones

4 6

Re: [Dovecot] change smtp port
by Charles Marcus 24 Jan '12

24 Jan '12

On 2012-01-24 7:51 AM, Amira Othman <a.othman(a)cairosource.com> wrote: > Thanks for reply > > The problem that ISP for some reason port 25 is not stable and refuse > connection for several times so I tried to change port to 587 instead > of 25 to keep sending emails. And I though that I can stop using port > 25 as it's not always working from ISP As I said, you obviously do not understand how smtp works. This is made obvious by your questions, and failure to understand that port 25 is *the* port for receiving email on the public internet. Period. If your main problem with port 25 is *sending* (relaying outbound) mails, then you will need to take this up with your ISP. If they are unable or unwilling to address the problem, one option would be to setup your system to relay through some other smtp relay service on the internet using port 587 as you apparently read somwehere, but you don't do this by changing the main smtpd daemon to port 587, because as you discovered, you won't be able to receive *any* emails like this. That said, I fail to see any relevance to dovecot in this thread... -- Best regards, Charles

1 0

[Dovecot] Trying to get metadata plugin working
by Thomas Koch 24 Jan '12

24 Jan '12

Hi, I'm working on a Kolab related project and wanted to use dovecot on my dev machine. However I'm stuck with the metadata-plugin. I "solved" the permissions problems but now I get dict: Error: file dict commit: file_dotlock_open(~/Maildir/shared-metadata) failed: No such file or directory Before that, I had dict { metadata = file:/var/lib/dovecot/shared-metadata but got problems since my normal user had no permission to access /var/lib/dovecot. I compiled the plugin from the most recent commit. My dovecot runs in a chroot. I can login with KMail and can create Groupware (annotated) folders, but the metadata file dict won't get created and I also can't set/get metadata via telnet. doveconf -N # 2.0.15: /etc/dovecot/dovecot.conf # OS: Linux 3.1.0-1-amd64 x86_64 Debian 6.0.3 auth_mechanisms = plain dict { metadata = file:~/Maildir/shared-metadata } mail_access_groups = dovecot mail_location = maildir:~/Maildir mail_plugins = " metadata" passdb { driver = pam } plugin { metadata_dict = proxy::metadata } protocols = " imap" service dict { unix_listener dict { group = dovecot mode = 0666 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { mail_plugins = " metadata imap_metadata imap_annotatemore" } Best regards, Thomas Koch, http://www.koch.ro

4 5