June 2008 - dovecot - dovecot.org

[Dovecot] expire database
by Alfonso Sparano 17 Jun '08

17 Jun '08

Hi all I would like to know if there is function to force the load into the expire database of the old mails. I've enabled the function today (dovecot 1.1rc10) and I've a lot of old message that I think are not loaded automatically. What can I do? Thanks a Lot

2 1

[Dovecot] Mercurial repositories for ManageSieve and Sieve
by Stephan Bosch 17 Jun '08

17 Jun '08

Hello Dovecot users, Recently I was asked to use Mercurial for the ManageSieve development just like Dovecot. As a matter of fact I have been using Mercurial for some time now. Now that I am back from a short and active vacation I am ready to publish my repositories. The repositories are publicly available at: http://hg.rename-it.nl/ The -patch repositories are so-called Mercurial Queues (MQ) repositories. This provides an easy (quilt-like) means to manage patches over an upstream source repository like the one that exists for Dovecot. The patches are managed in a repository called 'patches' below the .hg directory in your main repository. Currently, these MQ repositories only have the managesieve.patch witch is the actual patch I refresh and release each time Timo makes a new Dovecot release. The following command sequence shows how to incorporate the managesieve patch repository in a freshly cloned dovecot-1.1 tree: hg clone http://hg.dovecot.org/dovecot-1.1 cd dovecot-1.1 hg clone http://hg.rename-it.nl/dovecot-1.1-managesieve-patch .hg/patches hg qpush When updating the dovecot tree it is important to unapply all patches before performing 'hg pull' on the dovecot tree: hg qpop --all hg pull hg update hg qpush This otherwise results in a multi-head situation which can be resolved using a 'hg rollback' or using 'hg qpop --all' afterwards, which should gracefully clean up the situation (never merge the heads!). Updating the patch repository works as follows: hg qpop --all hg -R .hg/patches pull hg -R .hg/patches update hg qpush After 'hg qpush' the dovecot repository is patched and can be compiled as explained for the normal patch method using the .diff.gz (don't forget ./autogen.sh for compiling dovecot in a mercurial repository). The actual ManageSieve implementation for Dovecot-1.1 is available as a separate package and thus there exists a separate repository for it. Its compilation is no different from the .tar.gz releases, except for the fact that (just like for dovecot) ./autogen.sh needs to be executed before configure. The new (and highly experimental) Sieve implementation is available as the dovecot-libsieve repository. It contains a README file that should explain most of its features and the installation procedure. This is currently still not release-ready and should not be used for any important mail whatsoever. I publish this for people who want to test and play around with it to provide feedback on early bugs and (release-critical) missing features. The TODO and README files provide an overview of my current progress towards a first release. Regards, Stephan.

1 0

[Dovecot] Re-applying Sieve rules on existing messages
by Tomasz K Jarzynka 17 Jun '08

17 Jun '08

Hi, I saw this hack on the Internet once but now that I need it, can't find it anymore. Does anybody know how to trick Dovecot LDA/Sieve into filtering mail that has already been stored into a folder? Thanks in advance ;) -- Tomasz K. Jarzynka / +48 601 706 601 / tomee(a-t)genesilico(d-o-t)pl Laboratory of Bioinformatics and Protein Engineering | www.genesilico.pl International Institute of Molecular and Cell Biology | www.iimcb.gov.pl

2 1

[Dovecot] quota-warning.sh
by Drew Marshall 17 Jun '08

17 Jun '08

Hi I have just installed Dovecot (Moved from Courier-IMAP) and have just about everything running well thanks to some great docs in the wiki (Thank you to all those who contributed!) however I have not managed to get the quota warnings working yet. I have done much Googling and come back with some oldish posts which help me to understand how the quota warnings work but having looked at all this I have realised I don't have a quota-warning.sh script in /usr/local/bin where the config suggests it ought to be. In fact, I don't have a file by this name any where on the box. I have downloaded both 1.1 source (Which I'm running) and 1.0 and I can't find this anywhere in the sources or the tarball. Could some one tell me where I can find this or am I supposed to make my own? If so is there and example that I can follow? Thanks in advance for your help Drew -- In line with our policy, this message has been scanned for viruses and dangerous content by Technology Tiger's Mail Launder system <www.mail-launder.com> Our email policy can be found at www.technologytiger.net/policy Technology Tiger Limited is registered in Scotland with registration number: 310997 Registered Office 55-57 West High Street Inverurie AB51 3QQ

2 2

[Dovecot] Installation Problem -
by Kaushal Gandhi 16 Jun '08

16 Jun '08

Hello, I have installed dovecot Version 1.0.14 on Centos Linux 4.6. When I do ./configure --with-pam, I get below mentioned error. Please help Best Regards Kaushal ---------------- Error ---------- Making all in imap-login make[3]: Entering directory `/tmp/dovecot-1.0.14/src/imap-login' /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/kerberos/include -o imap-login client.o client-authenticate.o imap-proxy.o ../login-common/liblogin-common.a ../lib-imap/libimap.a ../lib-auth/libauth.a ../lib/liblib.a -L/usr/kerberos/lib -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto -lresolv -ldl -lz gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/kerberos/include -o imap-login client.o client-authenticate.o imap-proxy.o ../login-common/liblogin-common.a ../lib-imap/libimap.a ../lib-auth/libauth.a ../lib/liblib.a -L/usr/kerberos/lib -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto -lresolv -ldl -lz ../login-common/liblogin-common.a(ssl-proxy-openssl.o)(.text+0x10e9): In function `ssl_proxy_init': /tmp/dovecot-1.0.14/src/login-common/ssl-proxy-openssl.c:735: undefined reference to `SSL_CTX_set_info_callback' collect2: ld returned 1 exit status make[3]: *** [imap-login] Error 1 make[3]: Leaving directory `/tmp/dovecot-1.0.14/src/imap-login' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/tmp/dovecot-1.0.14/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/tmp/dovecot-1.0.14' make: *** [all] Error 2 --

3 2

[Dovecot] Caseless folder delivery?
by Jay Levitt 16 Jun '08

16 Jun '08

I'm using exim4 to deliver into dovecot 1.1, and using plus-addressing to deliver mailing lists directly to appropriate folders in my "lists" mailbox. I created a file called /folder-map.lists that looks like ## folder-map.lists dovecot: Dovecot lpedge: Linux PowerEdge ... and so on. So mail to lists-lpedge(a)jay.fm goes to the "Linux PowerEdge" folder. The one annoying thing: I'd like to avoid creating explicit folder-map entries where the plus-address suffix is identical an existing folder name. That *almost* works, but I like to name my folders with appropriate capitalization, and deliver doesn't seem to have a way to do "caseless" delivery. For instance, ideally, I wouldn't have to create the "dovecot: Dovecot" entry; mail to my lists-dovecot(a)jay.fm address would go into the "Dovecot" folder. I can't figure out how to do this. Is there a way to do that using deliver? Could there be? Relevant portions of the exim configuration follow. (And, p.s., am I using the new -a and -m options correctly? Are they used for anything yet?) Jay Levitt ## exim.conf ...begin routers ORIG_FOLDER = ${substr_1:$local_part_suffix} FOLDER_MAP = /etc/exim/folder-map.$local_part MAPPED_FOLDER = ${lookup{ORIG_FOLDER}lsearch{FOLDER_MAP}{$value}{ORIG_FOLDER}} # Mailboxes whose localparts are folders foldered_mailboxes: driver = accept local_part_suffix = +* : -* local_part_suffix_optional local_parts = +foldered_mailboxes address_data = user=$local_part folder="MAPPED_FOLDER" transport = dovecot_virtual_delivery ...begin transports dovecot_virtual_delivery: driver = pipe command = /usr/local/libexec/dovecot/deliver \ -f $return_path \ -a $local_part$local_part_suffix@$domain \ -d ${extract{user}{$address_data}} \ -m "${extract{folder}{$address_data}}" -n message_prefix = message_suffix = log_output return_path_add user = vmail

2 1

[Dovecot] Need help configuering Dovecot to support folders that contain sub-folders and messages
by Dan Roberts 14 Jun '08

14 Jun '08

Hi - Last year I set up a new CentOS 5 server and through the install process permitted it to set up dovecot as my IMAP server. ./dovecote --version returns "1.0.rc15" With the system up and running I moved the tar files of my old email accounts over and everything seemed to be just fine. Recently I have upgraded my primary workstation to a Mac Pro - and that of course has it's Mail application. Let me summarize briefly to be sure that I don't omit some minor detail that makes all the difference in the world. Previously I used Netscape 7.2 as my mail client and then went over to Thunderbird on the PC - in either application, under Server Settings / Advanced I had to uncheck the box "Server supports folders that contain sub-folders and messages". Then whenever I attempted to add a new subfolder I would be given a choice - "This server restricts folders to two special kinds. Allow your new folder to contain: [] Folders Only [x] Messages Only". Though perhaps not ideal, this has worked ok up till now. The Leopard Mail application doesn't seem to have this sort of support - it assumes that every folder or subfolder can and should contain both, so all I get are folders that can hold messages. This is a problem as I can't create any new folders to reorganize mail. Though I had thought about resolving this, or at least trying to when I first encountered it - life got busy. So my skills have become a bit rusty and I have not done anything about it. But now I would like to. I ported over my email and my wife's - so perhaps there is some legacy setting in those folders that prevents the bliss of folders and mail in the same subfile. But I created a new email account for my daughter and that has the same limitation. In Leopard mail, folders to hold folders look White, whereas folders to hole mail look blue. In Thunderbird Folders to hold Folders are in Italics whereas Folders to hold mail are normal font. I am also using Webmin to simplify access to the server, but I don't see anything obvious under the dovecot tool for this. The installation was the basic default, so far as I can remember. I have run Yum to update the files and at last review there was nothing outstanding. Regarding my configuration, dovecot -n reports as follows: [root@trailrunner sbin]# ./dovecot --version 1.0.rc15 [root@trailrunner sbin]# ./dovecot -n # /etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap imaps listen: disable_plaintext_auth: yes login_dir: /var/run/dovecot//login login_executable: /usr/libexec/dovecot/imap-login mail_extra_groups: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u auth default: passdb: driver: pam userdb: driver: passwd [root@trailrunner sbin]# Truly hoping that someone can help me resolve this. While I can use Thunderbird, I do like the Apple Mail feature of seeing the summary of email at the top of the list. Appreciate the help and insights - Cheers Dan

6 8

Re: [Dovecot] Need help configuering Dovecot to support folders that contain sub-folders and messages
by Charles Marcus 13 Jun '08

13 Jun '08

On 6/13/2008, Dan Roberts (dan(a)jlazyh.com) wrote: > Using Yum (or whatever it is called) I thought things were up to > date. Though I use to hack code and fearlessly write perl, my > skills are rusty and I don't want to blow a whole in the system. As I said... add atrpms.net to your available repositories... it has up to date rpms... -- Best regards, Charles

1 0

[Dovecot] Need a quick, safe method to empty /home/user/Maildir/{.Junk, .Trash}
by Jeff Kowalczyk 13 Jun '08

13 Jun '08

I have some (Thunderbird client, dovecot-1.0.13, Maildir) users who get an appalling amount of spam-with-attachment, and it's causing backups to take an inordinate amount of time. I'll implement some quota and server-side spam management when I go to dovecot-1.1, but in the meantime: What is the safest way to empty all messages within, but not delete, the following folders from the server command line: /home/user/Maildir/.Junk /home/user/Maildir/.Trash I don't want the Thunderbird-2.0.14 client to report corrupt indexing, or worse not show the folder at next use. Thanks.

7 13

[Dovecot] 1.1rc10: istream-crlf.c: assertion failed: (size != 0)
by Marco De Benedetto 13 Jun '08

13 Jun '08

Hi, I am migrating from 0.99.14 to 1.1.rc10 and from mbox to maildir. During the conversion, via convert plugin, I get this assertion failure: 2008-06-13 14:12:51 Error: IMAP(username): Next message unexpectedly lost from 4700 2008-06-13 14:12:51 Error: IMAP(username): Next message unexpectedly lost from 4700 2008-06-13 14:12:51 Panic: IMAP(username): file istream-crlf.c: line 49 (i_stream_crlf_read_common): assertion failed: (size != 0) 2008-06-13 14:12:51 Error: IMAP(username): Raw backtrace: imap [0x80d1c31] -> imap [0x80d1c9a] -> imap [0x80d159c] -> imap [0x80d6fa5] -> imap [0x80d6fc3] -> imap [0x80d81b9] -> imap(i_stream_read_data+0x39) [0x80d60f9] -> imap [0x80cadb3] -> imap [0x80cbdeb] -> imap(message_parser_parse_next_block+0x1d) [0x80cae5d] -> imap(index_mail_cache_parse_continue+0x22) [0x8096132] -> imap(maildir_save_continue+0x4b) [0x807a49b] -> imap(mail_storage_copy+0xdb) [0x80a07ab] -> imap(maildir_copy+0x5b) [0x8076ebb] -> /usr/lib/dovecot/modules/imap/lib20_convert_plugin.so(convert_storage+0x48c) [0xb7f279bc] -> /usr/lib/dovecot/modules/imap/lib20_convert_plugin.so [0xb7f2841d] -> imap(mail_namespaces_init+0x645) [0x80a1345] -> imap(main+0x3c1) [0x806ab51] -> /lib/libc.so.6(__libc_start_main+0xe0) [0xb7e02450] -> imap [0x805ca91] 2008-06-13 14:12:54 Error: IMAP(username): Mailbox conversion: Couldn't create mailbox directory Ospedale 2008-06-13 14:12:54 Fatal: IMAP(username): Mailbox conversion failed, exiting If it can be useful for debugging purpose, is there something I can do to identify the mailbox causing the failure? I am also investigating why the plugin tried to recreate directory for the already converted mailbox "Ospedale". -- Marco De Benedetto

1 0

[Dovecot] 9GB of messages in /tmp
by Charles Marcus 13 Jun '08

13 Jun '08

Hello, Well, I have a brain-dead user (using Thunderbird 2.0.0.14) who just won't listen when I tell them not to try to move 5000+ messages at one time (or if deleting, bypass the Trash), and they managed to royally screw up their maildirs... I have two problems... 1. The /tmp directory has 9+GB in it... can I just rm tmp/* on that directory without making this problem worse? and 2. One of the directories they were moving now has 5 copies of a whole bunch of messages... I'm very dangerous when it comes to command-line work beyond really basic stuff, and my scripting skills are less than inspiring... Is there a relatively safe command-line way of finding all messages that have more than one instance, and deleting all but the last instance? Tia... -- Best regards, Charles

4 6

[Dovecot] Dovecot 1.1rc9 strange messages
by Raphael Bittencourt S. Costa 13 Jun '08

13 Jun '08

Helo all, I'm working on a migration from qmail+courier+maildrop to postfix +dovecot1.1+lda and today the logs has too many strange messages like this: Jun 12 10:51:22 mailserver03 dovecot: IMAP(xxxxl(a)xxxx.com.br): Broken file /data/services/dominios/xx.com.br/m/ma/mapel//Maildir/.Sent/dovecot-uidlist line 29: UID larger than next_uid (535 >= 535) Jun 12 10:51:26 mailserver03 dovecot: POP3(xxxx(a)xxxxx.com.br): Broken file /data/services/dominios/bx.com.br/n/no/nordeste//Maildir/dovecot-uidlist line 2: UID larger than next_uid (12 >= 12) Should I worry about this? Why dovecot-uidlist is getting broken? []s, Raphael Costa

2 2

[Dovecot] "Disable non webmail IMAP access" in vpopmail and Dovecot
by Alessio Cecchi 13 Jun '08

13 Jun '08

Hello, i'm using in my installation qmail+vpopmail and now I have migrated from courier-imap to dovecot. Dovecot is very much faster with large mailbox than courier-imap. But I have a problem. vpopmail has a feature that allows you to "Disable non webmail IMAP access", many webmail using imap as if they were, and they are, a client IMAP. vpopmail give me the ability to disabile IMAP, expect for 127.0.0.1, both for individual users than for single domain. So i can grant IMAP access, from remote client, only for some users but webmail access for all. Here you can read some of my messages in the vpopmail's list: http://www.mail-archive.com/vchkpw@inter7.com/msg25880.html But with dovecot this feature seems not to be compatible. A friend of the vpopmail's list sent me a patch for dovecot but I can not get it to work: >->->->->->->->->->->->->->->->->->->->->->->->->->-> Hi Alessio, i spent over 5 hours looking for a solution to this problem and i found one working for me in dovecot sources edit src/auth/passdb-vpopmail.c than add char *remotehost = net_ip2addr(&auth_request->remote_ip); auth_request_log_info(auth_request, "vpopmail", "remote ip is: %s", remotehost); before if (((vpw->pw_gid & NO_IMAP) != 0 && line than modify the condition line to look like: if (((vpw->pw_gid & NO_IMAP) != 0 && strcmp(auth_request->service, "IMAP") == 0 *&& strcmp(remotehost, "127.0.0.1") != 0*) || ((vpw->pw_gid & NO_POP) != 0 && strcmp(auth_request->service, "POP3") == 0)) { auth_request_log_info(auth_request, "vpopmail", "%s disabled", auth_request->service); password = NULL; *result_r = PASSDB_RESULT_USER_DISABLED; } else ............... this way you will preserve webmail access and cut imap from external in case -i limit is defined in vpopmail hope it helps <-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-< Can someone help me in making compatible this useful feature of vpopmail with dovecot? Thank you -- Alessio Cecchi is: @ ILS -> http://www.linux.it/~alessice/ Assistenza Sistemi GNU/Linux -> http://www.cecchi.biz/ @ PLUG -> ex-Presidente, adesso senatore a vita, http://www.prato.linux.it @ LOLUG -> neo-Socio http://www.lolug.net

1 0

[Dovecot] configure error on HP-UX: C99 compatible vsnprintf() call
by Woonsan Ko 13 Jun '08

13 Jun '08

Hi All, I tried to build dovecot-1.1.rc9 on a HP-UX machine, but failed to configure with the following message: configure: error: You don't appear to have C99 compatible vsnprintf() call The environment is like the following: - command: ./configure - uname: HP-UX B.11.23 U ia64 - aCC version: HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003] Also, I tried to run `./configure CC=c99' and `./configure CC="/opt/aCC/bin/aCC -Ae" also, but the result was the same. I'm not sure, but the HP C compiler does not seem to support C99 fully with vsnprintf() call. Is there any workaround for this problem? TIA, Woonsan

2 11

[Dovecot] [Patch] Fix delay on imao-append
by Bruno Prémont 13 Jun '08

13 Jun '08

Dovecot version: 1.1-rc8, 1.1-rc9 System: Linux-2.6.2x User-Agent: claws-mail-3.3 and 3.4 When appending messages (e.g. copy from mailclient local folder or second server to dovecot imap folder) dovecot answers with: <tag> OK [APPENDUID <n> <m>] Append completed\r\n This answer often reaches the client as two or more TCP packets, the client (when not using TCP_NODELAY on its socket) ACKs with some delay. When copying lots of (small) messages this delay has a very negative impact on copy time even though there are lots of network and system resources available. Sample sniffer output on client host: ... 1 0.0000 claws dovecot IMAP Request: 14639 APPEND "Test" (\Seen) {853} 2 0.0033 dovecot claws IMAP Response: +OK 3 0.0034 claws dovecot IMAP Request: <message> 4 0.0096 dovecot claws IMAP Response: 14639 5 0.0467 claws dovecot TCP 33453 > imap [ACK] 6 0.0481 dovecot claws IMAP Response: OK [APPENDUID 1204729411 2] Append Completed. 7 0.0481 claws dovecot TCP 33453 > imap [ACK] ... The delay of about 35ms between packet 4 and its ACK in packet 5 causes copies from client to server to be extremely slow. (Client and server on same 100Mb LAN, same result if client and server are on same host) The attached patch makes dovecot send the whole answer in a single packet, thus not triggering the delay issue. As far as I found out the delay is generated by Naggle algorithm, this algorithm being used by Linux TCP stack for small packets with the aim of improving payload/overhead share. Bruno Prémont RESTENA Foundation

2 2

[Dovecot] How many imap processes per user
by Martijn de Munnik 13 Jun '08

13 Jun '08

Hi, I'm using dovecot for the first time on a production server (before dovecot I used bincimapd). I have a question about the number of imap (not imap-login) processes created for a user. I've seen 100+ processes for just 1 user. So far it only occurs for 1 user, other users have just 1 imap process. I now the user is using thunderbird and 2 mailclients are logged in at the same time (one workstation and one laptop). Is there an issue with dovecot/thunderbird? info@dem 28596 15780 0 10:48:41 ? 0:02 imap info@dem 28933 15780 0 10:50:57 ? 0:01 imap info@dem 25627 15780 0 10:28:55 ? 0:00 imap info@dem 28938 28933 0 - ? 0:00 <defunct> info@dem 29472 15780 0 10:54:23 ? 0:00 imap info@dem 25628 25627 0 10:28:55 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 29329 29327 0 - ? 0:00 <defunct> info@dem 29805 29801 0 - ? 0:00 <defunct> info@dem 24303 24300 0 10:20:46 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 29941 15780 0 10:58:09 ? 0:00 imap info@dem 28480 28477 0 - ? 0:00 <defunct> info@dem 28329 15780 0 10:46:28 ? 0:03 imap info@dem 29177 29176 0 - ? 0:00 <defunct> info@dem 28749 28748 0 - ? 0:00 <defunct> info@dem 29801 15780 0 10:56:56 ? 0:00 imap info@dem 29180 29179 0 10:52:05 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 29635 15780 0 10:55:35 ? 0:00 imap info@dem 29642 29635 0 - ? 0:00 <defunct> info@dem 28477 15780 1 10:47:37 ? 0:02 imap info@dem 28200 28199 0 - ? 0:00 <defunct> info@dem 29942 29941 0 10:58:09 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 28597 28596 0 - ? 0:00 <defunct> info@dem 28330 28329 0 - ? 0:00 <defunct> info@dem 25610 25609 0 10:28:49 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 28748 15780 0 10:49:48 ? 0:02 imap info@dem 25609 15780 0 10:28:49 ? 0:00 imap info@dem 29176 15780 0 10:52:05 ? 0:01 imap info@dem 29327 15780 0 10:53:12 ? 0:01 imap info@dem 29179 15780 1 10:52:05 ? 0:05 imap info@dem 28199 15780 0 10:45:22 ? 0:03 imap info@dem 29474 29472 0 - ? 0:00 <defunct> info@dem 24300 15780 0 10:20:46 ? 0:00 imap All those processes are really slowing down the server. Martijn

2 1

[Dovecot] strange looking code and userdb errors
by Tony den Haan 13 Jun '08

13 Jun '08

hi, i'm trying to use passdb ldap and userdb prefetch, using the userdb_ prefixes in pass_attrs, and i get: passdb didn't return userdb entries looking at the code at auth/userdb-prefetch.c i see: if (auth_request->userdb_reply == NULL) { if (auth_request->auth->userdbs->next == NULL) { /* no other userdbs */ auth_request_log_error(auth_request, "prefetch", "passdb didn't return userdb entries"); } else { /* more userdbs, they may know the user */ auth_request_log_info(auth_request, "prefetch", "passdb didn't return userdb entries"); } callback(USERDB_RESULT_USER_UNKNOWN, auth_request); return; } is this really correct? if so it migth be a good idea to at least print different errors Tony

2 1

[Dovecot] auth issues on centos5 with ldap backend
by Jurvis LaSalle 13 Jun '08

13 Jun '08

Hi, We've had some issues with auth. /var/log/secure is full of 1000s of these lines: Jun 4 19:12:08 khan dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser= rhost=127.0.0.1 user=user123 Users can usually login OK with their ldap credentials, but occasionally logins slow to a crawl if not outright fail, esp people checking mail through Squirrelmail. Things get better after a dovecot restart. Googling around, I thought if we switched the order or disabled the second passdb we had configured for our dovecotadmin account, these failures would go away but that did not happen. Any thoughts or additional info I can provide? Pardon the unusual install prefix. We're trying to keep the source install separated from the ancient dovecot rpm shipped in rhel5. Thanks, Jurvis [root@khan ~]# /etc/dovecot/sbin/dovecot -n # 1.0.13: /etc/dovecot-1.0.13/etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log ssl_cert_file: /etc/pki/dovecot/certs/star.idi.harvard.edu.crt ssl_key_file: /etc/pki/dovecot/private/star.idi.harvard.edu.key login_dir: /etc/dovecot-1.0.13/var/run/dovecot/login login_executable: /etc/dovecot/libexec/dovecot/imap-login mail_location: maildir:/RAID5/mailboxes/%u maildir_stat_dirs: yes maildir_copy_with_hardlinks: yes imap_client_workarounds: outlook-idle delay-newmail auth default: executable: /etc/dovecot/libexec/dovecot/dovecot-auth master_user_separator: * debug: yes debug_passwords: yes passdb: driver: pam args: blocking=yes userdb: driver: passwd args: blocking=yes

4 9

[Dovecot] Current opened sessions
by tutankamen 12 Jun '08

12 Jun '08

Is there in Dovecot a command or another way to show current opened sessions, I mean who is connected using IMAP ti the server? It could be useful to know if I can restart my server without dusturb any client. Thank you Tutan

2 1

[Dovecot] Antispam plugin custom behavior?
by Kyle Wheeler 12 Jun '08

12 Jun '08

Hello, I currently have a setup on my system with what I call "magic folders" to enable spam filter training. Here's how it works: 1. If you have a false-negative, put the spam into the Spam.Report folder 2. If you have a false-positive (which has all kinds of ugly spamassassin protective markup in it), put the message into the Spam.NotSpam folder Currently what happens is that a cron job comes along every five minutes and processes the messages in those folders. In the case of the NotSpam folder, it strips the message of the spamassassin markup, retrains the bayesian net, and redelivers the message (e.g. via deliver). In the case of the Report folder, the message is used to train the bayesian net (among other things) and then deleted. I'd love to be able to trigger these actions when the mail is moved, rather than have a cron job inspecting the mailboxes. I looked into the antispam plugin (http://johannes.sipsolutions.net/Projects/dovecot-antispam) which seems nice but doesn't appear sufficiently generic for my needs. What would really work is if I could get it set up such that putting a message into either of those directories is turned into piping the message to a script of my choosing (a different one for each folder). Does anyone know a good way of getting my own custom behavior in here, or is my cronjob setup probably the best way? ~Kyle -- The optimist thinks this is the best of all possible worlds. The pessimist fears it is true. -- J. Robert Oppenheimer

7 14

[Dovecot] quota-rewrite patch & userdb quota overriding
by Alan Premselaar 12 Jun '08

12 Jun '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've spent the past couple of hours trying to figure this out by checking the wiki and googling, but haven't come up with anything that works yet. I just installed dovecot 1.0.14 with the quota-rewrite (1.09) patch and i'm trying to get the quota overridden via a passwd-file type userdb. I had 1.0.13 without the new quota style patched in working but having trouble figuring this out. any help would be appreciated. prior to the quota-rewrite patch (which i installed with the hopes of using quota_warn feature) i was able to put the following line into my passwd-file userdb and it was working: alan:*:1000:1000::/home/alan::userdb_quota=maildir:storeage=2048000:ignore=Sent (which is what I wanted) but now with the new quota definition style, I'm not sure what I need to define the extra fields as. here is dovecot -n: # 1.0.14: /usr/local/etc/dovecot.conf log_path: /var/log/dovecot.log protocols: imap imaps managesieve ssl_cert_file: /etc/pki/tls/certs/dovecot.pem ssl_key_file: /etc/pki/tls/private/dovecot.pem disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(managesieve): no verbose_proctitle: yes mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): ~/sieve sieve(default): sieve(imap): sieve(managesieve): ~/.dovecot.sieve auth default: ~ passdb: ~ driver: pam ~ userdb: ~ driver: passwd-file ~ args: /usr/local/etc/dovecot.passwd ~ userdb: ~ driver: passwd ~ socket: ~ type: listen ~ master: ~ path: /var/run/dovecot/auth-master ~ mode: 384 ~ user: dovecot ~ group: dovecot plugin: ~ quota_rule: *:storage=1G ~ quota_rule2: Trash:storage=100M thanks, alan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhPd+cACgkQE2gsBSKjZHQNMACghSk7awVX1Aj5HVeo0KjRxyZc lT0AoLJA00SiYiefi2wNrAOt7L6N5eg4 =mA8L -----END PGP SIGNATURE-----

3 3

[Dovecot] Wrong message information
by Anders 12 Jun '08

12 Jun '08

We have a few users that every so often get empty data in their message overview. From and subject are empty, and the date is 1-Jan-1970. When opening the message in full view, all things are fine. Also, the data in the actual maildir file is fine. It looks a lot like the issue described here: http://dovecot.org/list/dovecot/2008-March/029282.html The server is Linux, ext3, no NFS, and Dovecot 1.1.rc4. The few clients that have had this problem so far have been Outlook Express. What can be done to debug this? Thanks, Anders.

3 25

[Dovecot] Mutually exclusive Exim setup instructions
by Karl Schmidt 12 Jun '08

12 Jun '08

The correct way has to be one or the other: http://wiki.dovecot.org/LDA/Exim are mutually exclusive with http://wiki.dovecot.org/HowTo/DebianStable It appears that exim can either call dovecot's LDA or make the delivery itself. There may be good reasons to do it one way or the other. ---------------------------------------------------------------- Karl Schmidt EMail Karl(a)xtronics.com Transtronics, Inc. WEB http://xtronics.com 3209 West 9th Street Ph (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 If you are not part of the solution, you are part of the precipitate. ----------------------------------------------------------------

4 5

[Dovecot] outlook windows problem
by rashantha de silva 11 Jun '08

11 Jun '08

hello, client can not connect using outlook. has any of you noticed this problem. can not connect with imap or as pop. i am using a self signed certificate.

5 14

[Dovecot] Status of Dbox in 1.1
by Steve Fosdick 11 Jun '08

11 Jun '08

What is the status of dbox in dovecot 1.1 please? I have read the release notes and checked the archives but I can't find this information. TiA, Steve.

4 3